On order
Eni i-Sigma top 10W-40
Synthetic multigrade oil for heavy-duty engines under severe conditions
SAE 10W-40
Specifications
- Brand
- Eni
- Category
- Engine oils
- Type
- Engine oils
- Viscosity
- SAE 10W-40
- Manufacturer code
- 001081
- Availability
- On order
Manufacturer's description
Eni i-Sigma performance E4 10W-40 is a synthetic lubricant with fuel economy characteristics, for lubricating the heavy-duty diesel engines of commercial vehicles operating under severe conditions. The product delivers the longest oil drain intervals allowed by the engine makers.
Applications
- Eni i-Sigma performance E4 10W-40 is a multigrade synthetic technology lubricant with fuel saving characteristics for heavy duty vehicles operating under severe conditions. This product allows the maximum oil change intervals foreseen by the manufacturers.
Performance & benefits
- It has demonstrated excellent characteristics in the engine tests required by manufacturers and ACEA, in particular minimizing wear on cylinders (bore polishing), piston rings, etc
- All metal surfaces are effectively protected against wear and deposits by ensuring and maintaining the maximum engine efficiency over time, allowing extended oil replacement intervals and maintenance over time
- The fuel saving characteristics reduce fuel consumption in relation to conventional multigrade Diesel engine oils
- The SAE 10W-40 grade makes this product suitable for most of the climatic conditions as it facilitates the engine cold start at low temperature while ensuring effective lubrication even at high temperatures
Standards & approvals
ACEA E4
ACEA E4 oil sequence
ACEA's sequence for heavy-duty diesel engines.Source
ACEA E7
ACEA E7 oil sequence
ACEA's sequence for heavy-duty diesel engines.Source
MAN M 3277
MAN M 3277 — extended-drain engine oil
MAN's specification for synthetic extended-drain truck engine oils, in engines without a particulate filter.
MAN M 3377
MAN M 3377 — low-SAPS engine oil
MAN's specification for low-ash oils in engines with a particulate filter, at medium drain intervals.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 875 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 14.3 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 97.3 | ASTM D 445 |
| Viscosity index | 150 | ASTM D 2270 |
| Viscosity at -25°CmPa·s | 6850 | ASTM D 5293 |
| Flash point COC°C | 230 | ASTM D 92 |
| Pour point°C | -30 | ASTM D 5950 |
| B. N.mg KOH/g | 12.3 | ASTM D 2896 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS