On order
Eni i-Sigma special TMS 10W-40
Synthetic oil for diesel engines with exhaust aftertreatment systems
SAE 10W-40
Specifications
- Brand
- Eni
- Category
- Engine oils
- Type
- Engine oils
- Viscosity
- SAE 10W-40
- Manufacturer code
- 001069
- Availability
- On order
Manufacturer's description
Eni i-Sigma top 10W-40 is a high performance synthetic multigrade lubricant for engines operating under severe conditions, with fuel economy characteristics and the longest drain intervals. The product is recommended by most of the engine makers in the sector.
Applications
- Eni i-Sigma top 10W-40 is a multigrade high performance synthetic technology lubricant suitable for the lubrication of supercharged engines operating in severe conditions with fuel saving features and which allows the maximum change intervals. The product is indicated for most manufacturers in the sector.
Performance & benefits
- The top quality bases used and the special additivation technology guarantees a constant performance even with extended change intervals
- The SAE grade (10W-40) makes the product suitable for any climatic situation, allowing start-up even under critical low temperature conditions
- The dispersant-detergent properties and the neutralizing power against acidic combustion products guarantees exceptional piston cleanliness and dispersion of solid combustion or degradation products, avoiding precipitation and subsequent formation of deposits
- The product guarantees excellent oxidation resistance even in prolonged operation at high temperatures. Its antioxidant, anti-rust and anti-wear characteristics are suitable for severe operation and provide long change intervals. Oxidation is effectively inhibited, ensuring constant viscosity in the life time of use. Metallic surfaces are effectively protected against wear and corrosion ensuring and maintaining maximum engine efficiency over time
Standards & approvals
ACEA E4
ACEA E4 oil sequence
ACEA's sequence for heavy-duty diesel engines.Source
ACEA E7
ACEA E7 oil sequence
ACEA's sequence for heavy-duty diesel engines.Source
API CI-4
Diesel engine oil, API CI-4 performance level
API's service category for compression-ignition engines. Current category.Source
Cummins CES 20078
Cummins' low-SAPS specification for diesel engines with full exhaust aftertreatment, with strict oxidation and aeration requirements.
Deutz DQC III-18
The 2018 issue of Deutz oil quality class III, with oxidation stability requirements updated from the 2010 issue.
DTFR 15B120
Daimler Truck DTFR 15B120 (formerly MB 228.5) — multigrade engine oil, high TBN
An engine oil for high-performance diesel engines without aftertreatment, carrying a higher alkaline reserve (TBN) than the 228.3 level. Daimler Truck renumbered the MB-Approval sheets into the DTFR series; MB 228.5 and DTFR 15B120 are the same requirement.Source
MAN M 3277
MAN M 3277 — extended-drain engine oil
MAN's specification for synthetic extended-drain truck engine oils, in engines without a particulate filter.
Renault VI RLD-2
Renault Trucks RLD-2 — heavy-duty diesel engine oil
Renault Trucks' specification for extended-drain truck engine oils at the ACEA E7 level, without a low-ash requirement.
Volvo VDS-3
Volvo's engine oil specification for Euro III–V trucks without a particulate filter, with severe soot control requirements for EGR engines.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 868 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 14.7 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 98 | ASTM D 445 |
| Viscosity index | 156 | ASTM D 2270 |
| Viscosity at -25°CmPa·s | 6124 | ASTM D 5293 |
| Pour point°C | -42 | ASTM D 5950 |
| Flash point COC°C | 226 | ASTM D 92 |
| B. N.mg KOH/g | 12.5 | ASTM D 2896 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS