Divinol Synthogear 75W-90
Semi-synthetic GL-4/GL-5 gear oil for vehicle gearboxes, transaxles and hypoid gears
SAE 75W-90
Divinol Synthogear Extra LS 75W-90 (Art. No. 52000) is a high-performance limited-slip (LS) gear oil – a multifunctional gearbox oil for the rear axles and final drives of passenger cars and for certain vehicle gearboxes. It stands out for an unusually wide operating temperature range, optimum viscosity-temperature behaviour, high wear protection and excellent oxidation stability. Typical applications are the rear axles and final drives of commercial and private vehicles – including those fitted with limited-slip differentials – as well as certain gearboxes where an API GL-4 / GL-5 LS oil is specified. Divinol Synthogear Extra LS 75W-90 meets API GL-4 / GL-5 LS and MIL-L-2105D / PRF-2105E and covers the performance requirements of MAN 341 E2, MAN 341 Z2, MAN 342 M2, Arvin Meritor 0-76-N, DAF, Iveco, MB-Approval 235.0, Mack GO-J, Scania STO 1:0, JCB-Standard 4000/3900 and ZF TE-ML 02B/05A/07A/08/12L/12M/16B/16C/16D/17B/19B/21A (Divinol Romania lists ZF TE-ML 05C/12C/16E).
MIL-L-2105D and MIL-PRF-2105E
The US military EP gear oil specification quoted in both of its issues: the older L-2105D and its replacement PRF-2105E.
MAN 341 type Z2 — gearbox oil
Type Z2 of the MAN 341 list for manual gearbox oils.
MAN 342 type M2 — axle oil
Type M2 of the MAN 342 list, with tighter rear-axle thermal stability requirements than M1.
Meritor O-76-N — axle lubricant
The Meritor specification for axle lubricants in the O-76 series; the trailing letter gives the performance level and base oil, N being one of the synthetic extended-drain levels.
Mercedes-Benz approval 235.0
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Scania STO 1:0 — transmission and axle oil
Scania's works standard for the oils in its own gearboxes and axles, with synchroniser and hypoid gear protection requirements.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 75W-90 | |
| Appearance | clear | |
| Colour | < 2.0 | DIN ISO 2049 |
| Viscosity/40°C | 110 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 15 mm²/s | ASTM D 7042 |
| Viscosity index | > 140 | ASTM D 2270 |
| Density/15°C | 0.880 g/cm³ | DIN EN ISO 12185 |
| Pour point | < -40 °C | DIN ISO 3016 |
| Flash point (Cleveland) | > 170 °C | DIN ISO 2592 |
We email you the sheets listed below in a single archive. No account, no order required.