On order
Eni Blasia FMP 100
High performance EP oil for modern industrial reduction gearboxes
ISO VG 100
Specifications
- Brand
- Eni
- Category
- Industrial gear oils
- Type
- Mineral oils
- Viscosity
- ISO VG 100
- Manufacturer code
- 002701
- Availability
- On order
Manufacturer's description
Eni Blasia 100 is a lubricant with EP characteristics for enclosed industrial gears, splash- or circulation-lubricated, subject to high mechanical and thermal loads and high speeds in the presence of sliding friction. Eni Blasia 100 can be used to lubricate other heavily loaded components such as couplings, screw drives and plain bearings at low speeds. It is also recommended for oil-spray lubrication systems.
Applications
- Eni Blasia 100 is a gear oil with EP characteristics for enclosed industrial gears lubricated with splash or circulation systems especially where high loads and temperatures, high speeds and sliding friction is present. Eni Blasia 100 can be also used to lubricate other heavily-loaded components such as couplings, transmission screws and low speed plain bearings. Suitable for use in oil-mist lubrication systems.
Performance & benefits
- Protection of lubricated components during operation thanks to a robust antiwear additive system
- Resistance to high operative temperatures (up to 100°C) due to very good antioxidant properties
- Non-corrosive behaviour against gaskets and seals as well as metals such as steel, cast iron, copper and bronze
- Quick separation from water that could accidentally enter the system thanks to an outstanting demulsive capacity
Standards & approvals
ISO 12925-1 CKD
Industrial gear lubricant CKD — ISO 12925
Class CKD of ISO 12925-1: a gear oil with the same additive package as CKC but greater thermal stability, for gear units running hot.
AIST No.224
AIST 224 — EP gear oil for steel mills
The AIST (Association for Iron & Steel Technology) requirement for non-leaded EP gear oils in steel plant equipment, carried over from the former U.S. Steel 224 specification.
Fives Cincinnati P-76
Fives Cincinnati P-76 — gear oil
An approval number from the Fives Cincinnati list of fluids for use in its own machine tools. It covers extreme-pressure gear oils for machine tool drives.
Muller Weingarten DT 55 005 CLP
Müller Weingarten DT 55 005 — CLP gear oil
The works standard of press builder Müller Weingarten for CLP gear oils in its own equipment, with load-carrying requirements under shock loading.
DIN 51517-3 CLP
Industrial gear oil CLP — DIN 51517, part 3
Part 3 of the German lubricating oil standard: class CLP, gear oils with extreme-pressure additives. It requires an FZG pass plus corrosion and ageing protection.
David Brown S1.53 101 level
David Brown S1.53.101 level — EP gear oil
David Brown's specification for extreme-pressure gear oils in open and enclosed drives under heavy and shock loading. It overlaps DIN 51517-3 CLP and U.S. Steel 224.
ANSI/AGMA 9005-F16
ANSI/AGMA 9005-F16 (2016)
The current edition of the AGMA lubrication practice for enclosed industrial gear drives, replacing the 2002 E02 edition.
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 889 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 100 | ASTM D 445 |
| Viscosity index | 96 | ASTM D 2270 |
| Flash point COC°C | 242 | ASTM D 92 |
| Pour point°C | -27 | ASTM D 5950 |
| Demulsibility at 82°Cmins | 25 | ASTM D 1401 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS