Shell Helix Ultra Professional AB-L 0W-30
Fully synthetic oil for Mercedes-Benz engines, MB 229.52
SAE 0W-30
PETRONAS Syntium 7000 DM 0W-30 is a fully synthetic lubricant formulated with °CoolTech™ technology that effectively controls damaging heat, resists oxidation and prevents oil degradation and deposit build-up, protecting parts and maintaining engine efficiency for the full drain interval. It is especially designed for passenger cars using direct-injection turbocharged gasoline and diesel engines such as Daimler, also suitable for SUVs, light vans and biofuel-running vehicles fitted with diesel particulate filters, catalytic converters, fuel injectors, multi-valves or turbochargers operating under severe conditions. Benefits include ultimate protection against oil thickening from biodiesel-accelerated oxidation, ultimate resistance to sludge formation, ultimate lubrication capability against abnormal wear in the valvetrain and cylinder wall, ultimate control of damaging heat to prevent turbocharger and piston deposits, and ultimate piston cleanliness that extends engine life and maximizes power output and fuel efficiency. The oil meets the API SN specification and the ACEA C3 performance level, and carries MB approvals 229.51/229.52, plus Renault RN0700 performance level. Typical physical characteristics include a density of 0.858 g/cm³ at 15°C, a kinematic viscosity of 12.09 cSt at 100°C, a viscosity index of 217, a flash point of 230°C, a sulphated ash content of 0.72%, a TBN of 8.1 mgKOH/g, CCS of 5510 mPa·s at -35°C and a pour point of -42°C.
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
ACEA C3 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Density @15°Cg/cm³ | 0.858 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 12.09 | ASTM D 445 |
| Viscosity index | 217 | ASTM D 2270 |
| Flash point COC°C | 230 | ASTM D 92 |
| Sulphated ash% | 0.72 | ASTM D 874 |
| TBNmgKOH/g | 8.1 | ASTM D 2896 |
| CCS at –35°CmPa*s | 5510 | ASTM D5293 |
| Pour point°C | -42 | ASTM D97 |
We email you the sheets listed below in a single archive. No account, no order required.