Brand
Mobil (ExxonMobil)
Type
Engine oils
Viscosity
SAE 0W-30
Manufacturer code
2015101010K3

Mobil 1 ESP 0W-30

Low-ash full synthetic oil for petrol, diesel and hybrid engines, ACEA C3

Specifications

Category
Engine oils
Viscosity
SAE 0W-30
Manufacturer code
2015101010K3
Availability
On order

Manufacturer's description

Mobil 1 ESP 0W-30 is an advanced full synthetic engine oil designed to provide exceptional cleaning power, wear protection and overall performance, engineered to prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles. It meets or exceeds the requirements of many leading industry and car manufacturer standards for newer modern engines. The oil is recommended for a wide range of passenger cars, SUVs and light vans, designed for modern high-efficiency gasoline, diesel and hybrid vehicles from Porsche, Volkswagen and Mercedes-Benz, as well as Japanese and Korean vehicles calling for SAE 0W-30. Based on Mobil low-ash synthetic technology, it meets or exceeds ACEA C3 to help protect exhaust after-treatment systems and API SP to help address LSPI, and it is especially suitable for extreme conditions and cold-start protection. It carries approvals including MB 229.31, 229.51 and 229.52, Porsche C30, and VW 504 00/507 00. Formulated with leading-edge components fully compatible with modern Diesel Particulate Filters and Gasoline Catalytic Converters, it offers a low ash, low sulphur and phosphorous content to protect after-treatment systems, active cleaning agents against deposits and sludge, outstanding thermal and oxidation stability for extended drain intervals, low oil consumption, enhanced frictional properties that can aid fuel economy, and excellent low-temperature cold-start protection.

Applications

  • Mobil 1™ ESP 0W-30 carries recommendations for a wide range of passenger cars, SUVs and light vans. It is designed for modern high efficiency gasoline, diesel and hybrid cars from Porsche, Volkswagen and Mercedes-Benz as well as for Japanese and Korean vehicles that specifically call for a SAE 0W-30 viscosity grade and any of the specifications the oil supports. • Mobil 1™ ESP 0W-30 based on Mobil low-ash synthetic technology, meets or exceeds ACEA C3 industry standard to help protect exhaust gas after-treatment systems designed to limit engine emissions. It also meets or exceeds API SP engine test requirements to help address LSPI (Low Speed Pre-Ignition), making it a preferred choice for downsized direct injection turbocharged gasoline engines. • Mobil 1™ ESP 0W-30 is especially suitable for extreme conditions, where conventional oil often may not perform. In particular, it can help cold engine protection and start-up in applications calling for the same specification in the 5W-30 grade. • Mobil 1™ ESP 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer. Owner's manual should be consulted for recommended viscosity grade and specification.

Performance & benefits

  • Low Ash ContentHelps to reduce particulate build up in Diesel Particulate Filters
  • Low Sulfur and Phosphorous contentHelps to reduce poisoning of Gasoline Catalytic Converters
  • Active cleaning agentsHelps to reduce deposits and sludge build-up to enable long and clean engine life
  • Outstanding thermal and oxidation stabilityHelps to reduce oil aging allowing extended drain interval protection
  • Low oil consumptionLess hydrocarbon pollution
  • Enhanced frictional propertiesPotentially aids fuel economy
  • Excellent low temperature capabilitiesQuick cold weather starting and ultra-fast protection helps to extend engine life

Standards & approvals

  • MB-Approval 229.31

    Mercedes-Benz approval 229.31

    A Mercedes-Benz operating-fluid approval (BeVo sheet).

  • MB-Approval 229.51

    Mercedes-Benz approval 229.51

    A Mercedes-Benz operating-fluid approval (BeVo sheet).

  • MB-Approval 229.52

    Mercedes-Benz approval 229.52

    A Mercedes-Benz operating-fluid approval (BeVo sheet).

  • Porsche C30

    Porsche's approval for low-SAPS SAE 0W-30 oils in petrol and diesel engines with a particulate filter.

  • VW 504 00

    VW 504 00 — longlife petrol engine oil

    VW's standard for low-SAPS, variable-drain oils in petrol engines, compatible with catalysts and particulate filters.

  • VW 507 00

    VW 507 00 — low-SAPS longlife diesel oil

    VW's standard for low-ash, variable-drain oils in diesel engines with a particulate filter. It is the most quoted level for the group's modern diesels.

  • API SL

    Petrol engine oil, API SL performance level

    API's service category for spark-ignition engines. Current category.Source

  • ACEA C3

    ACEA C3 oil sequence

    ACEA's sequence for catalyst-compatible, low-SAPS engines.Source

Also listed

  • API SN Engine Test Requirements
  • API SN PLUS ENGINE TEST REQUIREMENTS
  • API SP ENGINE TEST REQUIREMENTS
  • API SQ Engine Test Requirements

Approved for

  • Mercedes-Benz
  • MB
  • VW
  • Volkswagen
  • Porsche
  • ACEA
  • API
  • SAE

Fits

Typical characteristics

PropertyTypical valueMethod
Kinematic viscosity @ 40 Cmm2/s64.8ASTM D445
Kinematic viscosity @ 100 Cmm2/s12.2ASTM D445
Density @ 15.6 Cg/ml0.846ASTM D4052
Pour point°C-51ASTM D97
Flash point°C230ASTM D92

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

  • SDSEN
  • SDSRO
  • TDSEN

Where should the files go?

We send the archive to the address below. It is the only field we need — the rest only help us reach you if a sheet is missing.

What you get

    Str. Soporului, nr. 12, Cluj-NapocaContactAbout us
    RO