Shell Argina S2 30

Specifications

Brand: Shell
Category: Marine lubricants
Viscosity: SAE 30
Manufacturer code: 001G1521
Availability: On order

Manufacturer's description

Lubricants for medium-speed trunk piston engines. Shell Argina S2 30 is a multifunctional crankcase lubricant for highly rated medium-speed diesel engines operating on residual, blended, distillate or bio fuels. Shell Argina S2 30 has a BN of 20 and is designed for conditions of low oil stress.

Applications

Medium-speed industrial or marine propulsion and auxiliary engines, burning residual, blended or distillate fuel oils, which create conditions of low oil stress. These conditions usually occur:
Shell Argina S2 30 can also be used in marine engine reduction gears and certain other ship-board applications, where specialist lubricants are not required.
Advice on applications not covered in this leaflet may be obtained from your Shell Representative.
Where fuels with sulphur <2% are in use

Performance & benefits

Extended oil lifeShell Argina S2 30 is a BN 20 oil which can be used with multiple fuel types. Please contact your Shell technical representative who will be able to offer additional support in product selection and guidance on extending oil life and minimising sweetening.
Engine protectionShell Argina S2 30 has an optimised level of detergency leading to exceptionally clean crankcase, valve deck and pistons.
System efficiencyShell Argina S2 30 has a high detergency/low dispersancy formulation in order to effectively release contaminants and water in centrifugal separators. Shell Argina S2 30 can be used to top up engines already running on any other member of the Argina family, giving immediate control of BN without the need for an oil change. Shell Argina S2 30 may be particularly applicable as a balancing grade for engines which switch between residual fuel and distillate operation.
In newer engine designs, less than 10 years old

Standards & approvals

Where oil consumption is > 1.5 g/kWh
Where load factors are <70%

Approved for

MAN
Wartsila

Typical characteristics

Property	Typical value	Method
SAE grade (viscosity class)	30
Kinematic viscosity @40°Cmm2/s	106	ASTM D445
Kinematic viscosity @100°Cmm2/s	11.85	ASTM D445
Viscosity index	100	ASTM D2270
Density @15°Ckg/m3	898	ASTM D4052
Flash point (PMCC)°C	210	ASTM D93
Pour point°C maximum	-9	ASTM D97
Base numbermg KOH/g	20	ASTM D2896
Sulphated ash% m/m	2.6	ASTM D874
Load carrying capacity (FZG Gear Machine) A/8.3/90failure load stage	11	ISO 14635-1

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

TDSENFebruary 2025
SDSENAugust 2023
SDSROAugust 2023

Alternatives and similar products

Equivalent alternatives

On order
Mobilgard 300 C
System oil for two-stroke crosshead marine diesel engines with oil-cooled pistons
SAE 30
Same viscosity grade
On order
Mobilgard 312
Trunk piston engine oil for marine diesels on low-sulphur distillate fuels, SAE 30
SAE 30
Same viscosity grade
On order
Mobilgard ADL 30
Oil for high-BMEP medium- and high-speed marine diesel engines on distillate fuel
SAE 30
Same viscosity grade
On order
Mobilgard M330
TBN 30 trunk piston oil for medium-speed marine engines on residual fuel
SAE 30
Same viscosity grade

From the Shell Argina range

On order
Shell Argina S2 40
BN 20 crankcase oil for medium-speed marine trunk piston engines
SAE 40
On order
Shell Argina S3 30
BN 30 crankcase oil for medium-speed marine engines under moderate oil stress
SAE 30
On order
Shell Argina S3 40
BN 30 crankcase oil for medium-speed marine engines under moderate oil stress
SAE 40
On order
Shell Argina S4 40
BN 40 crankcase oil for medium-speed marine engines under high oil stress
SAE 40

My order