On order
Eni Rotra 80W-90
Mineral API GL-3 gear oil for transmissions without hypoid gears
SAE 80W-90
Specifications
- Brand
- Eni
- Category
- Manual gearbox & axle oils
- Type
- Manual transmission oils
- Viscosity
- SAE 80W-90
- Manufacturer code
- 001273
- Availability
- On order
Manufacturer's description
eni Rotra MP/S 80W-90 is a special gear lubricant with EP (extreme pressure) and anti-stick-slip characteristics. It is recommended for lubricating the hypoid gearing of plated limited-slip differentials, and for oil-immersed brakes and clutches.
Applications
- Eni Rotra MP/S 80W-90 is a special lubricant for gears with special E.P. (Extreme Pressure) and anti stick-slip characteristics, which makes it suitable for lubrication of the hypoid gears in limited slip differentials and of axles with wet brakes and clutches.
Performance & benefits
- The special E.P. additivation used in this product guarantees the continuity of the lubrication film even when the gears are operated under particularly heavy and dynamic impulse loads with very high and intermittent sliding speeds between the teeth
- The anti-slip additive contained in the product can modify the friction coefficient to prevent vibration phenomena in the clutch mechanism of the limited slip differential and in the oil immersed brakes used in the tractors
- The anti-wear properties and strong greasiness considerably help to reduce the wear of gears and bearings
- The particular oxidation stability avoids oil deterioration in parts operating at high temperature and effectively counteracts the tendency to increase viscosity and sludge formation
- The strong anti-rust properties protect the gears and supports even in the presence of moisture
- The strong anti-foam additivation conferred on the lubricant eliminates the negative consequences that excessive formation of foam would cause with regard to the continuity of the lubricant film
Standards & approvals
API GL-5
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 901 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 13.9 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 124.1 | ASTM D 445 |
| Viscosity index | 105 | ASTM D 2270 |
| Viscosity at -26°CmPa·s | 135000 | ASTM D 2983 |
| Flash point COC°C | 215 | ASTM D 92 |
| Pour point°C | -33 | ASTM D 5950 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- TDS
- TDS