On order
Mobilube GX 80W-90
Heavy-duty gear oil for manual gearboxes, axles and final drives, API GL-4
SAE 80W-90
Specifications
- Brand
- Eni
- Category
- Manual gearbox & axle oils
- Type
- Manual transmission oils
- Viscosity
- SAE 80W-90
- Manufacturer code
- 001282
- Availability
- On order
Manufacturer's description
eni Rotra HY 80W-90 is a transmission lubricant with EP (extreme pressure) characteristics, for use in manual gearboxes and differentials, final drives and power transmission units of agricultural and construction machinery.
Applications
- Eni Rotra HY 80W-90 is a lubricant for transmissions with EP (extreme pressure) characteristics for use in transmission groups, in particular in manual and differential transmissions including transaxle transmission, end gear reducers and power take-off gears for agricultural and earthmoving machines.
Performance & benefits
- The presence of special EP (extreme pressures) additives allows the product to protect the surfaces of gears and bearings even when high specific loads occur
- The correct balancing of the anti-wear and greasing characteristics ensures the best operation of synchronizers that maintain their effectiveness even in severe operating conditions such as driving in city traffic that forces frequent gear changes
- The particular oxidation stability avoids oil deterioration in parts operating at high temperature and effectively counteracts the tendency to increase viscosity and sludge formation
- It is not corrosive to steel and therefore contributes in keeping the lubricated parts in efficient conditions
- Its strong anti-rust properties prevent corrosion of the gears even in the presence of moisture
Standards & approvals
API GL-4
Gear oil, API GL-4 service level
API's service designation for axle and manual transmission oils.
ZF TE-ML 16A
ZF TE-ML 16A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 17A
ZF TE-ML 17A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | B&C | |
| Density at 15°Ckg/m³ | 895 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 14.1 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 133.6 | ASTM D 445 |
| Viscosity index | 103 | ASTM D 2270 |
| Viscosity at -26°CmPa·s | 120000 | ASTM D 2983 |
| Flash point COC°C | 210 | ASTM D 92 |
| Pour point°C | -30 | ASTM D 5950 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS