Divinol GL 5 80W-90
Multigrade EP hypoid gear oil for heavy-duty axles, API GL-5, MIL-L-2105 D, MB 235.0
SAE 80W-90
Divinol Hypoid-Getriebeöl DB SAE 80 (Art. No. 80750) is an EP (extreme-pressure) gearbox oil formulated for the running-in and subsequent lubrication of heavily loaded final drives. Its EP additive package protects the tooth flanks under high loads, both during the running-in phase and in regular service. The oil is suitable for heavily loaded gearboxes, steering gears and auxiliary gearboxes, wherever the equipment manufacturer permits an SAE 80 gear oil of this performance level. Divinol Hypoid-Getriebeöl DB SAE 80 meets API GL-5 and MIL-L-2105 D and covers the performance requirements of MAN 342 M1, MB-Approval 235.0, Renault GL-5, Voith 3.325-339, Volvo 97310 / 97316 and ZF TE-ML 07A, 08, 16B/C/D, 17B, 19B, 21A.
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
API GL-5 / MIL-L-2105D — EP axle oil
The performance level for extreme-pressure hypoid axle oils defined by the US military specification MIL-L-2105D, in practice equivalent to API GL-5.
MIL-L-2105D — EP gear and axle oil
The US military specification for extreme-pressure gear oils, in practice equivalent to API GL-5. Superseded by MIL-PRF-2105E and then SAE J2360.
MAN 342 type M1 — axle oil
MAN's list of axle oils; type M1 covers mineral hypoid oils at standard drain intervals.
Mercedes-Benz approval 235.0
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Renault, API GL-5 level — axle oil
Renault's requirement that the axle oil be at the API GL-5 level, that is, a hypoid oil with extreme-pressure additives.
Voith 3.325-339 — retarder and transmission oil
The Voith list of oils approved for its own bus and truck transmissions and retarders.
Volvo 97310 / 97316 — transmission and axle oils
The Volvo numbers for the oils in its own gearboxes and axles, used when ordering and in the service schedule.
ZF TE-ML 07A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 08 lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 16B, 16C and 16D — marine and industrial transmission oils
Chapter 16 of the ZF list of admitted lubricants, for marine transmissions and industrial gear units; the letters B, C and D separate the levels required by different unit families.
ZF TE-ML 17B lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 19B lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 21A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 80W | |
| Colour | L 3,0 | DIN ISO 2049 |
| Viscosity/40°C | 85 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 10.5 mm²/s | ASTM D 7042 |
| Viscosity index | 110 | ASTM D 2270 |
| Density/15°C | 0,890 g/cm³ | DIN EN ISO 12185 |
| Pour point | -25 °C | DIN ISO 3016 |
| Flash point (Cleveland) | 200 °C | DIN ISO 2592 |
We email you the sheets listed below in a single archive. No account, no order required.