Eni Blasia BM 220

Specifications

Brand

Eni

Category

Industrial gear oils

Type

Mineral oils

Viscosity

ISO VG 220

Manufacturer code

002708

Availability

On order

Manufacturer's description

Eni Blasia BM 220 is a special gear lubricant formulated with sulphur and phosphorus compounds to deliver high anti-wear protection under every condition of high or low speed and high or shock loading. The product contains a colloidal dispersion of molybdenum disulfide (MoS2) that strengthens the oil film under very high pressures, preventing the direct metal-to-metal contact that leads to severe wear (scuffing). Eni Blasia BM 220 is recommended in particular for lubricating chains, cables, tracks and spur gears with high reduction ratios, and worm gears with high sliding friction and possible high operating temperatures.

Applications

• Eni Blasia BM 220 is a special gear oil with EP characteristics formulated with sulphur and phosphorus compounds to deliver a robust protection from wear in every condition of high/ slow speeds and high loads or shock loads; the product contains a colloidal dispersion of molybdenum disulfide that improves the oil film resistance in presence of very high pressures hence preventing the direct metal-to-metal contacts that can result in serious wear damages (‘scuffing’). Eni Blasia BM 220 is particularly recommended to lubricate chains, wires, tracks and spur gears with a high reduction ratio and worm gears where sliding friction and very high operative temperatures can occur.

Performance & benefits

• Protection of lubricated components during operation thanks to a robust antiwear additive system
• Resistance to high operative temperatures (up to 100/110 °C) due to very good antioxidant properties
• Non-corrosive behaviour against gaskets and seals as well as metals such as steel, cast iron, copper and bronze
• Quick separation from water that could accidentally enter the system thanks to an outstanting demulsive capacity
• Consistent reduction of vibrations and noise

Standards & approvals

• ANSI/AGMA 9005-E02 (EP)

  ANSI/AGMA 9005-E02, EP class

  The extreme-pressure gear oil class of the E02 edition of AGMA 9005, for enclosed drives carrying high and shock loads.

• ISO 12925-1 CKD

  Industrial gear lubricant CKD — ISO 12925

  Class CKD of ISO 12925-1: a gear oil with the same additive package as CKC but greater thermal stability, for gear units running hot.

• DIN 51517-3 CLP

  Industrial gear oil CLP — DIN 51517, part 3

  Part 3 of the German lubricating oil standard: class CLP, gear oils with extreme-pressure additives. It requires an FZG pass plus corrosion and ageing protection.

• ANSI/AGMA 9005-F16

  ANSI/AGMA 9005-F16 (2016)

  The current edition of the AGMA lubrication practice for enclosed industrial gear drives, replacing the 2002 E02 edition.

Approved for

• ISO
• DIN

Typical characteristics

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

• SDSEN
• TDSENSeptember 2017
• TDSRO