Mobil Super 3000 Formula RN 5W-30
Low-ash synthetic oil for Renault RN17 engines with particulate filter, ACEA C3
SAE 5W-30
PETRONAS Syntium 5000 RN17 5W-30 is a fully synthetic lubricant formulated with °CoolTech™ technology that effectively controls damaging heat, resists oxidation and prevents oil degradation and deposit build-up, protecting parts and maintaining engine efficiency for the full drain interval. It uses environmentally friendly lubricant technology suited to maintaining the high efficiency of exhaust gas after-treatment systems and fuel economy, and is especially designed for passenger cars using direct-injection turbocharged gasoline and diesel engines such as Renault, also suitable for SUVs, light vans and biofuel-running vehicles fitted with diesel particulate filters, catalytic converters, fuel injectors, multi-valves or turbochargers operating under severe conditions. Benefits include exceptional protection against oil thickening from biodiesel-accelerated oxidation, outstanding resistance to sludge formation, outstanding lubrication capability against abnormal wear in the valvetrain and cylinder wall, outstanding control of damaging heat to prevent turbocharger and piston deposits, and outstanding piston cleanliness that extends engine life and maximizes power output and fuel efficiency. The oil meets the ACEA C3 specification and carries Renault RN17 and MB approval 226.52. Typical physical characteristics include a density of 0.8508 g/cm³ at 15°C, a kinematic viscosity of 11.9 cSt at 100°C, a viscosity index of 174, a flash point of 224°C, a sulphated ash content of 0.77%, a TBN of 8.78 mgKOH/g, CCS of 5575 mPa·s at -30°C and a pour point of -45°C.
ACEA C3 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
Renault RN17 — new-generation engine oil
The Renault approval introduced in 2017 for low-viscosity oils in its modern engines, with fuel economy and DPF protection requirements.
Mercedes-Benz approval 226.52
A Mercedes-Benz operating-fluid approval (BeVo sheet).
| Property | Typical value | Method |
|---|---|---|
| Appearance | Clear and Bright | |
| Density @15°Cg/cm³ | 0.8508 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 11.9 | ASTM D 445 |
| Viscosity index | 174 | ASTM D 2270 |
| Flash point COC°C | 224 | ASTM D 92 |
| Sulphated ash% | 0.77 | ASTM D 874 |
| TBNmgKOH/g | 8.78 | ASTM D 2896 |
| CCS at –30°CmPa*s | 5575 | ASTM D5293 |
| Pour point°C | -45 | ASTM D97 |
We email you the sheets listed below in a single archive. No account, no order required.