Syntium Prime AV 5W-40
Synthetic-technology oil for cars with after-treatment systems, ACEA C3, VW 505.00/505.01
SAE 5W-40
PETRONAS Syntium 3000 AV 5W-40 is a fully synthetic lubricant formulated with °CoolTech™ technology that effectively controls damaging heat, resists oxidation and prevents oil degradation and deposit build-up, protecting engine parts and maintaining efficiency for the full drain interval. It is especially designed for passenger cars, SUVs and vans using direct-injection turbocharged gasoline and diesel engines such as Volkswagen and Mercedes-Benz, and is also suitable for vehicles running on biofuels or fitted with after-treatment exhaust systems, catalytic converters, fuel injectors, multi-valves or turbochargers operating under severe conditions. Benefits include exceptional resistance to oxidation and oil degradation that effectively controls sludge for maximum engine efficiency and lower emissions, superior lubrication capability that reduces wear in the valvetrain and cylinder wall, and superior piston cleanliness by controlling combustion-driven piston temperature rise for a longer engine life and maximized power output and fuel efficiency. The oil meets the API SP specification and the ACEA C3 performance level, and carries approvals VW 505.00/505.01, MB 229.51, Porsche A40, Renault RN0700/RN0710, FCA 955535-S2 and Ford WSS-M2C917-A. Typical physical characteristics include a density of 0.8551 g/cm³ at 15°C, a kinematic viscosity of 14 cSt at 100°C, a viscosity index of 171, a flash point of 230°C, a TBN of 7.46 mgKOH/g, CCS of 6003 mPa·s at -30°C and a pour point of -42°C.
Petrol engine oil, API SP performance level
API's service category for spark-ignition engines. Current category.Source
ACEA C3 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
VW 505 00 / 505 01 — diesel engine oil
VW's passenger-car diesel standards: 505 00 for ordinary engines, 505 01 for unit-injector engines, which demand a stronger antiwear package.
Mercedes-Benz approval 229.51
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Porsche's engine oil approval for petrol models without a particulate filter: a full-SAPS level with severe protection requirements at high speed and temperature.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Clear | |
| Density @15°Cg/cm³ | 0.8551 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 14 | ASTM D 445 |
| Viscosity index | 171 | ASTM D 2270 |
| Flash point COC°C | 230 | ASTM D 92 |
| Sulphated ash% | 0,8 | ASTM D 874 |
| TBNmgKOH/g | 7,46 | ASTM D 2896 |
| CCS at –30°CmPa*s | 6003 | ASTM D5293 |
| Pour point°C | -42 | ASTM D97 |
We email you the sheets listed below in a single archive. No account, no order required.