Mobil Super 3000 XE1 5W-30
Low-ash synthetic oil for BMW vehicles requiring Longlife-04, ACEA C2/C3
SAE 5W-30
Mobil 1 ESP Formula P 5W-30 is an advanced performance synthetic technology engine oil designed to provide exceptional cleaning power, wear protection and overall performance in both diesel and gasoline automobiles operating in temperate or hot climates, engineered to prolong the life and maintain the efficiency of emission systems. It is fully approved by Stellantis for engines requiring the latest FPW9.55535/03 specification (FPW9.55535/05 outside Europe), covering diesel engines DV5R (1.5L Blue HDi), DW10F (2.0L Blue HDi) and DW12RU (2.2L Blue HDi), and gasoline engines including 1.2L PureTech EB2 Turbo Gen1/Gen2 and 1.2L PureTech Atmospheric Gen1/Gen2; it is also suitable for hot-climate markets requiring PSA B 71 2297 approval. It further carries GM dexos2 and MB 229.31/229.51/229.52 approvals, and meets or exceeds API SJ through SN, ACEA C2 and ACEA C3. Made with a proprietary blend of leading-edge components, the oil delivers LSPI protection for gasoline turbocharged downsized engines, active cleaning agents against deposits and sludge, outstanding thermal and oxidation stability for extended drain intervals including in hot climates, enhanced frictional properties supporting fuel economy while meeting combined ACEA C2/C3 requirements, excellent low-temperature cold-start capability, and robust anti-wear properties protecting timing chains, cams, tappets and cylinders under severe mechanical stress.
GM's specification for low-SAPS oils in European diesel engines with a particulate filter, also used on some petrol engines.
Mercedes-Benz approval 229.31
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Mercedes-Benz approval 229.51
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Mercedes-Benz approval 229.52
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source
Petrol engine oil, API SJ performance level
API's service category for spark-ignition engines. Current category.Source
Petrol engine oil, API SL performance level
API's service category for spark-ignition engines. Current category.Source
Petrol engine oil, API SM performance level
API's service category for spark-ignition engines. Current category.Source
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
ACEA C2 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
ACEA C3 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
| Property | Typical value | Method |
|---|---|---|
| Kinematic viscosity @ 100 Cmm2/s | 11.8 | ASTM D445 |
| Kinematic viscosity @ 40 Cmm2/s | 64 | ASTM D445 |
| Flash point, Cleveland Open Cup°C | 239 | ASTM D92 |
| Pour point°C | -48 | ASTM D97 |
| Density @ 15 Cg/cm3 | 0.846 | ASTM D4052 |
| Viscosity index | 183 | ASTM D2270 |
We email you the sheets listed below in a single archive. No account, no order required.