Petronas Tutela TOP 4/S

Specifications

Brand

Petronas

Category

Brake fluids

Manufacturer code

76007

Availability

On order

Manufacturer's description

PETRONAS Tutela TOP 4/S is a brake fluid based on glycol ethers and boric esters, formulated for special and heavy-duty applications. Its boric-ester chemistry gives a high dry boiling point of 265 °C and a wet boiling point of 173 °C, helping to prevent vapour lock and maintain braking efficiency throughout the service life of the fluid. The fluid is clear and light yellow, with a density of 1.065 g/cm³ at 15 °C, a viscosity of 2 cSt at 100 °C and 1300 cSt at -40 °C, and passes the rubber compatibility tests on SBR, EPDM and natural rubber, protecting seals and hoses in the hydraulic circuit. Specifications: FMVSS 116 DOT 4, SAE J1703, SAE J1704, ISO 4925 Class 4, CUNA NC 956-01, ENSAYOS INTA - UNE 26-109-88, FIAT 9.55597 (Contractual Technical Ref. No. F005.F15), MS-90039.

Standards & approvals

• SAE J1703

  SAE J1703 — DOT 3 brake fluid

  The SAE standard for glycol brake fluids at the DOT 3 level, defined by dry and wet boiling point.

• SAE J 1704

  SAE J1704 — DOT 4 brake fluid

  The SAE standard for DOT 4 brake fluids, with a higher boiling point than DOT 3, particularly once the fluid has taken up water.

• CUNA NC 956-01

  CUNA NC 956-01 — Italian lubricant classification

  The CUNA classification — the Italian automotive standards commission — which numbers the categories of vehicle lubricants and fluids.

• ENSAYOS INTA - UNE 26-109-88

  UNE 26-109-88, INTA testing — engine oil (Spain)

  The Spanish engine oil standard, with the testing carried out by INTA, the national aerospace technology institute that certified them.

• FMVSS 116 - DOT4

  FMVSS 116 DOT 4 — brake fluid

  The US federal safety regulation defining the DOT brake fluid levels. DOT 4 demands a high boiling point both dry and after the fluid has taken up water.

• ISO 4925 Class 4

  Brake fluid Class 4 — ISO 4925

  The international standard for glycol brake fluids; class 4 matches the DOT 4 level, with a high boiling point both dry and wet.

Approved for

• ISO
• SAE

Typical characteristics

Packaging

• 0.5 L
• 1 L

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

• SDSEN
• SDSRO
• TDSEN
• TDSRO