On order
Shell PANOLIN S2 Hydraulic DU EAL 46
Biodegradable HEES synthetic hydraulic fluid for environmentally sensitive areas
ISO VG 46
Specifications
- Brand
- Shell
- Category
- Biodegradable lubricants (ECL)
- Manufacturer code
- 007A0429
- Availability
- On order
Manufacturer's description
EP universal grease - readily biodegradable synthetic esters. Shell PANOLIN S5 Grease EAL V320 2 is a high performance readily biodegradable grease designed for use in environmentally sensitive areas where eco-label compliance is required. Suited for use in exposed applications including dredging and pivot points on construction equipment. This grease is based upon a lithium soap thickener and is formulated to offer good resistance to water washout, outstanding load carrying capacity and excellent corrosion resistance characteristics.
Performance & benefits
- Wide Operating WindowA wide temperature range allowing for use across different environments and conditions, operating temperature -30 degC to 120 degC.
- Wear ProtectionOutstanding load carrying capacity and excellent corrosion resistance properties provide protection over a wide range of temperatures and conditions and ensure long component life.
- Maintaining system efficiencyShell PANOLIN S5 Grease EAL V320 2 offers good resistance to water wash off due to its outstanding adhesion properties.
- Lower Environmental ImpactAn ‘environmentally acceptable lubricant’ as defined by the USA EPA 2013 Vessel General Permit and EU Ecolabel. Offers reduced impact of leak or accidental spillage into the environment when used in marine environments compared to conventional mineral oils. Readily biodegradable and has a low ecotoxicity in accordance with requirements of EU Ecolabel (EEL)
- Meets requirement of United States Environmental Protection Agency’s (EPA) 2013 vessel general permit (VGP)
Standards & approvals
Swedish Standard SS 15 54 70
SS 15 54 70 — environmental requirements for greases (Sweden)
The counterpart of the Swedish SS 15 54 34 standard applied to greases: high biodegradability, low aquatic toxicity, and no environmentally hazardous classification.
Also listed
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Thickener | Lithium | |
| Base oil (type) | Ester | |
| Appearance, visual Colour | Beige | |
| Cone penetration, worked25°C/60 strokes 0.1mm | 265 - 295 | ASTM D217 |
| Dropping point°C minimum | 180 | IP 396 |
| Base oil kinematic viscosity @40°Cmm2/s | 320 | ASTM D445 |
| Viscosity index | 180 | DIN ISO 2909 |
| Emcor Rust test distilled Water | 0-1 | DIN 51802 |
| Emcor Rust test synthetic sea Water | 0-1 | DIN 51802 |
| Copper corrosion Test 24 hrs @100°C24h | Max.1B | ASTM D4048 |
| Four Ball Weld loadN minimum | 2 800 | ASTM D2596 |
| Four Ball Wear Test40kg; 1h; 75°C; mm scar | 0.65 | ASTM D2266 1200rpm |
| Water Resistance @90°C3 hours | 1 | DIN 51807 |
| Water Spray-off%wt. loss maximum | 35 | ASTM D4049 |
| Flow Pressure-30°C mbar | 700 | DIN 51805 |
| Lower and Upper Application Temperature°C | -30 - 120 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS