On order
AeroShell Grease 14
Multi-purpose helicopter grease, anti-fretting, −54 to +93 °C
U.S. : Aprobat MIL -G-25537C
Specifications
- Brand
- Shell
- Category
- Aviation greases
- Manufacturer code
- 001E8492
- Availability
- On order
Manufacturer's description
Synthetic grease for aircraft wheel bearings. AeroShell Grease 58 is an advanced general purpose and wheel bearing grease composed of a synthetic base fluid and a lithium complex soap thickener. AeroShell Grease 58 possesses outstanding combination high performance characteristics including high load carrying, corrosion protection, mechanical stability, oxidation resistance and wear resistance. The useful operating temperature range is -540C to +1750C
Applications
- AeroShell Grease 58 has been developed to exceed the requirements of the SAE AMS 3058 Wide Temperature Range Lithium Complex Aircraft Wheel Bearing Grease specification. It is recommended for use wherever severe operating conditions are encountered as in high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high resistance to water washout and corrosive fluids are required. AeroShell Grease 58 is the latest member of the AeroShell Lithium Complex Grease portfolio which includes AeroShell Greases 33 and 64. The wide range of applications include aircraft wheel bearings, engine accessories, control systems, actuators, screw-jacks, servo mechanisms and electric motors, helicopter rotor bearings, instruments, airframe lubrication, hinge pins, static joints, landing gears.
Standards & approvals
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Oil type | Synthetic Hydrocarbon | |
| Thickener type | Lithium Complex | |
| ColourVisual | Yellow | |
| Base oil viscosity 40°C mm2/s | 100 | ASTM D445 |
| Useful operating Temperature range°C | -54 to +175 | |
| Drop point°C | Min 250 | IP 396 |
| Worked penetration @25°C | 280 | ASTM D217 |
| Penetration unworked @25°C | 270 | ASTM D217 |
| Oxidation stability100h @kPa | 30 | ASTM D942 |
| Oil separation 30 hrs @175°C%m | 4 | ASTM D6184 |
| Water Washout @79°C%m | 1.5 | ASTM D 1264 |
| Evaporation loss 22h@%m | 4.9 | ASTM D2595 |
| Extreme pressure Weld load @27°Ckg | 400 | ASTM D2596 |
| Low Temperature Torque - Start @-54°CNm | 0.8 | ASTM D1478 |
| Low Temperature Torque - Run @-54°CNm | 0.15 | ASTM D1478 |
| Copper corrosion 24h@ | Passes | ASTM D4048 |
| Dynamic Rust prevention 3% NaCl 7 days @25°C | 0/0 | ASTM D6138 |
| Roll Stability 10% Water1/10 mm | 20 | ASTM D1831 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS