Eni Multitech 10W-40

Specifications

Brand

Eni

Category

Agricultural multifunction oils

Type

Universal

Viscosity

SAE 10W-40

Manufacturer code

001302

Availability

On order

Manufacturer's description

Eni Multitech 10W-40 is a modern, multifunctional lubricant formulated with synthetic technology, which meets the lubrication requirements of every component of modern agricultural and construction machinery.

Applications

• Eni Multitech 10W-40 is an advanced multifunctional lubricant (STOU) , which can fulfill the lubrication requirements of all the components of the most modern agricultural machinery, construction equipment and earthmoving machinery. According to the specifications of the vehicle manufacturer, it can be used in engines, transmissions, hydraulic systems, and also in axles, reduction gears, and wet brakes.

Performance & benefits

• An accurate selection of the additives used into its formulation allows Eni Multitech 10W-40 to have optimal detergent/dispersant characteristics and an outstanding oxidation stability together with antiwear, antifoam and antistick/antisquawk properties for a marked brake noise eduction
• The use of a special combination of base oils allows Eni Multitech 10W-40 to have a very high natural viscosity index, low pour point and appropriate viscosity characteristics throughout the whole range of operating temperatures and for all envisaged applications
• Eni Multitech 15W-40 can be used in almost all components that are normally present in farm tractors and off-highway vehicles such as gasoline and diesel (also turbo-charged) engines, mechanical and hydrostatic transmissions, transfer cases and axles, as well as transmissions with 'wet' brakes, hydraulic systems and controls, mechanical and hydraulic power take-offs and air compressors. Not suitable in those applications where an API GL-5 performance is required

Standards & approvals

• API SF

  Petrol engine oil, API SF performance level

  API's service category for spark-ignition engines, of around 1980. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source

• API CG-4

  Diesel engine oil, API CG-4 performance level

  API's service category for heavy-duty diesel engines, written for fuel below 0.5 % sulphur. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source

• API GL-4

  Gear oil, API GL-4 service level

  API's service designation for axle and manual transmission oils.

• Allison C-4

  Allison C-4 — off-highway automatic transmission fluid

  Allison's most widely quoted fluid specification for off-highway and truck automatic transmissions: stable wet-clutch friction, gear protection and seal compatibility.

• John Deere JDM J27

  John Deere JDM J27 — gear oil

  John Deere's specification for gear and axle oils in its own equipment.

• Caterpillar TO-2

  Caterpillar TO-2 — transmissions and wet brakes (superseded)

  Caterpillar's specification for transmission, clutch and wet-brake oils in off-highway equipment. Superseded by TO-4 but still quoted on universal off-highway oils.

• ZF TE-ML 06B

  ZF TE-ML 06B lubricant list

  ZF's approved-lubricant list for a family of its transmissions and axles.Source

• ZF TE-ML 06C

  ZF TE-ML 06C lubricant list

  ZF's approved-lubricant list for a family of its transmissions and axles.Source

• ZF TE-ML 07B

  ZF TE-ML 07B lubricant list

  ZF's approved-lubricant list for a family of its transmissions and axles.Source

• John Deere JDM J20C

  John Deere JDM J20C — universal tractor fluid

  John Deere's specification for the single fluid serving tractor transmission, hydraulics and wet brakes. One of the most widely quoted UTTO norms.

• FORD ESN-M2C134-D

  Ford ESN-M2C134-D — universal tractor fluid

  Ford's specification for the single fluid serving tractor transmission, hydraulics and wet brakes: stable wet-brake friction and gear protection.

• Ford ESN M2C 86B

  Ford ESN-M2C86-B — tractor hydraulic fluid

  Ford's older tractor hydraulic and transmission fluid specification, superseded by the M2C134 series.

• Case MS 1204/1206/1207/1209

  Case MS 1204/1206/1207/1209 — tractor fluid

  A series of Case — today CNH — works standards for the fluids in its own tractors; the MS 12xx numbers separate engine oil, the Hy-Tran transmission-hydraulic fluid and axle oils.

• ACEA E3

  ACEA E3 oil sequence

  ACEA's sequence for heavy-duty diesel engines of the Euro I–III era. An earlier sequence, no longer on ACEA's current list; it remains the level specified for the engines of its era.Source

Approved for

• ZF
• Caterpillar
• Allison
• Ford
• Case
• John Deere
• ACEA
• API

Fits

• Tractors & farm machinery
• Construction equipment

Typical characteristics

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

• SDSEN
• SDSRO
• TDSENJuly 2021
• TDSRO