On order
Eni OTE 32
Mineral turbine oil with rapid air release and excellent demulsibility
ISO VG 32
Specifications
- Brand
- Shell
- Category
- Turbine oils
- Viscosity
- ISO VG 32
- Manufacturer code
- 001F4448
- Availability
- On order
Manufacturer's description
Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines. Shell Turbo S4 GX 32 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance under the most severe operating conditions Shell Turbo S4 GX 32 will minimise wear, deposit and sludge formation even under cyclic peak loading conditions.
Applications
- Power and industrial steam, gas & combined cycle turbinesShell Turbo S4 GX 32 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines, especially those needing enhanced anti-wear performance to protect highly loaded gearboxes.
- Further industrial applicationsShell Turbo S4 GX 32 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors
- Turbo S4 GX 32
Performance & benefits
- Extended oil lifeShell Turbo S4 GX 32 delivers exceptional resistance to degradation, even under conditions of high oxidative and thermal stress. Excellent results in both the ASTM dry TOST and the TOST life test (ASTM D943) demonstrate the potential for Shell Turbo S4 GX 32 to offer extended service life, reduced maintenance costs and less downtime when compared to conventional mineral oil technology.
- Enhanced Equipment protectionThe excellent prevention of deposit formation provided by Shell Turbo S4 GX 32 enables it to lubricate the hottest gas turbine bearings with minimal deposit build up or sludge formation. This reduces the potential for critical component failure and the risk of unplanned turbine shutdown. As the pressure increases on gearboxes in turbines it is critical for an oil to provide greater anti-wear protection. Shell Turbo S4 GX 32 offers enhanced anti-wear protection for heavily loaded gear boxes helping end users maintain optimum operating conditions under challenging situations without sacrificing resistance to deposits or oil life.
- Enhanced System EfficiencyDemulsibility, air release, resistance to foaming, and filter blockage are critical factors for oil in the latest geared turbine designs (especially turbines which have shorter oil residence times). Shell Turbo S4 GX 32 offers excellent performance in all four areas, ensuring that optimum operating conditions are maintained.
- DIN 51515 Part 1 L-TDP & Part 2 L-TGP, 51524-2-HLP
- Shell Turbo S4 GX 32 meets & exceeds international specification and requirements of the major turbine manufacturers including
- General Electric Power GEK 32568Q, GEK 46506E, GEK 28143B, GEK 101941A, GEK 107395B, GEK 121608
- ISO 8068:2006 L-TSE, ISO 8068:2006 L-TGE, ISO 8068:2006 L-TGF, ISO 8068:2006 L-TGSE
- Shell Turbo S4 GX is approved by Siemens Power Generation, spec TLV 9013 04 and TLV 9013 05
- Shell Turbo S4 GX 32 meets the specification of Elliott Turbo-machinery X-18-0004
- Shell Turbo S4 GX meets Siemens Turbo-machinery specifications 1CW0047915, WN80003798, and report 65/0027
- GE Oil and Gas – Appropriate Specification listed under document ITN52220.04
- Shell Turbo S4 GX 32 has been classified as a low varnishing type turbine oil by GE Oil & Gas against the specifications listed under document ITN52220.04
- Shell Turbo S4 GX 32 is approved against the requirements of MHI MS04-MA-CL003 (R-8)
Standards & approvals
Alstom HTGD 90117 V 0001 AA
Alstom HTGD 90117 — turbine oil
A works standard for the lubricating and control oils of the maker's own turbines, with oxidation stability, air release and water separation requirements.
Solar ES 9-224AA Class II
Solar Turbines ES 9-224AA Class II — gas turbine oil
The Solar Turbines specification for the oils in its own gas turbines; Class II covers synthetic ester oils.
Also listed
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| ISO viscosity grade | 32 | ISO 3448 |
| Kinematic viscosity @40°Cmm2/s | 32.0 | ASTM D445 |
| Kinematic viscosity @100°Cmm2/s | 6.06 | ASTM D445 |
| Viscosity index | 139 | ASTM D2270 |
| Density @15°Cg/cm3 | 0.827 | IP 365 |
| Flash point (COC)°C | 232 | ASTM D92 |
| Pour point°C | -42 | ASTM D97 |
| Air release @50°Cminutes | 1 | ASTM D3427 |
| Copper corrosion @100°C3 hours | 1b | ASTM D130 |
| Neutralisation numbermg KOH/g | 0.15 | ASTM D974 |
| Water separabilityminutes to 3 mL minutes | 15 | ASTM D1401 emulsion |
| Steam Demulsibilityseconds | 95 | IP 19 |
| Rust Preventing Properties& | B No Rust | ASTM D665 A |
| Sequence I | 0/0 | |
| Sequence II | 0/0 | |
| Sequence III | 0/0 | |
| Load carrying capacity (FZG Gear Machine)failure load stage | 10 | ISO 14635-1 A/ |
| Modified RPVOT% of RPVOT | 95% | |
| TOST lifetimehours minimum | 10 000 | ASTM D943 |
| TOST 1000hr sludgemg/kg | 25 | ASTM D4310 |
| RPVOTminutes | 1 400 | ASTM D2272 |
| Time to 50% RPVOThours | 1 410 | |
| Sludge content at 50% RPVOTmg/kg | 25 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS