On order
Mobil DTE 732
Zinc-free turbine oil for gas and steam turbines, with enhanced air release
ISO VG 32
Specifications
- Brand
- Mobil (ExxonMobil)
- Category
- Turbine oils
- Viscosity
- ISO VG 32
- Manufacturer code
- 20156030A040
- Availability
- On order
Manufacturer's description
Mobil SHC™ 800 Ultra Series comprises Mobil SHC 832 Ultra and Mobil SHC 846 Ultra, superior high-performance synthetic turbine oils designed for steam turbines, gas turbines, combined cycle gas turbine (CCGT) and turbo compressor applications operating under the most severe conditions. The series is specifically formulated to withstand the thermal stresses of modern high-output stationary gas turbines, providing exceptional resistance to thermal/oxidative degradation and outstanding keep-clean performance with targeted deposit and varnish control — helping to prevent bearing deposits, filter plugging, servo-valve deposits and valve sticking. The oils also deliver the exceptional interfacial properties, including strong steam and water separation, required by modern high-performance steam turbines, together with strong anti-wear protection that meets the load-carrying demands of geared turbines. Together these properties extend equipment protection, improve operating reliability and reduce unscheduled downtime, while extending oil life and lowering lubricant costs. Mobil SHC 832 and 846 Ultra hold builder approvals from MAN Energy Solutions and Siemens, and meet GE Power GEK requirements, ASTM D4304 (Types I, II and III), China GB 11120-2011 and DIN 51515-1/-2 specifications, giving operators flexibility across a wide variety of turbine types while avoiding lubricant misapplication.
Applications
- Mobil SHC 832 and 846 Ultra are superior high performance turbine oils designed for use in steam turbines, gas turbines, combined cycle gas turbine (CCGT) and turbo compressor applications under the most severe operating conditions. Modern stationary gas turbines operate at high power output and severe operation causes thermal stressing of lubricant that can result in bearing deposits, filter plugging, servo-valve deposits and valve sticking or short oil life. Mobil SHC 800 Ultra Series have been specifically formulated to provide exceptional protection against thermal/oxidative degradation and outstanding keep-clean performance with specific deposit and varnish control. Mobil SHC 800 Ultra Series also feature the exceptional interfacial properties, in particular steam and water separation, required for modern high performance steam turbines. Mobil SHC 800 Ultra Series strong anti-wear performance is designed to meet load-carrying requirements of geared turbines.
Performance & benefits
- Excellent water and steam separation• Supports efficient system operation and reduced maintenance
- Meets or exceeds key builder requirements for both gas and• Provides flexibility to operators
- steam turbines• Avoids lube misapplication and costly change-out
Standards & approvals
GE Power GEK 121608
GE — turbine oil requirements
A General Electric specification for the lubricating and control oils of its own gas and steam turbines: high oxidation stability, rapid air release and resistance to varnish formation.
GE Power GEK 32568Q
GE — turbine oil requirements
A General Electric specification for the lubricating and control oils of its own gas and steam turbines: high oxidation stability, rapid air release and resistance to varnish formation.
Siemens Industrial Turbo Machinery MAT 812101
Siemens MAT 812101 — mineral turbine oil
Siemens' material standard for mineral gas and steam turbine oils in its own machines: high oxidation stability, rapid water separation and air release.
Siemens Industrial Turbo Machinery MAT 812102
Siemens MAT 812102 — synthetic turbine oil
Siemens' material standard for synthetic turbine oils, chosen where working temperature or drain interval exceed what a mineral oil can carry.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Air release Time, 50 Cmin | 1 | ASTM D3427 |
| Copper strip corrosion, 3 h, 100 CRating | 1B | ASTM D130 |
| Density @ 15.6 Cg/ml | 0.83 | ASTM D4052 |
| Emulsion, Time to 40/37/3, 54 Cmin | 5 | ASTM D1401 |
| FZG Scuffing, Fail load stage, A/8.3/90 | 10 | ISO 14635-1 |
| Flash point, Cleveland Open Cup°C | 266 | ASTM D92 |
| Foam, Sequence I, Stabilityml | 0 | ASTM D892 |
| Foam, Sequence I, Tendencyml | 0 | ASTM D892 |
| Foam, Sequence II, Stabilityml | 0 | ASTM D892 |
| Foam, Sequence II, Tendencyml | 0 | ASTM D892 |
| Foam, Sequence III, Stabilityml | 0 | ASTM D892 |
| Foam, Sequence III, Tendencyml | 0 | ASTM D892 |
| Kinematic viscosity @ 100 Cmm2/s | 6.4 | ASTM D445 |
| Kinematic viscosity @ 40 Cmm2/s | 33.9 | ASTM D445 |
| Pour point°C | -42 | ASTM D97 |
| Rotating Pressure Vessel Oxidation Testmin | 3700 | ASTM D2272 |
| Rust Characteristics, Procedure A | PASS | ASTM D665 |
| Rust Characteristics, Procedure B | PASS | ASTM D665 |
| Turbine Oil Stability Test, Life to 2.0 mg KOH/gh | >10000 | ASTM D943 |
| Viscosity index | 140 | ASTM D2270 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS