On order
Shell Diala S2 ZU-I Dried GT
Uninhibited, dried electrical insulating oil for transformers
Specifications
- Brand
- Shell
- Category
- Transformer & dielectric oils
- Manufacturer code
- 001D8376
- Availability
- On order
Manufacturer's description
High-performance inhibited electrical insulating oil. Shell Diala S3 ZX-I Dried is a premium inhibited electrical insulating oil manufactured from specially refined mineral oils with an ultra-low sulphur content. It offers very high oxidation stability and excellent dielectric properties, including at low temperatures. Shell Diala S3 ZX-I Dried is dried to achieve a breakdown voltage higher than that required by the industry standards. Shell Diala S3 ZX-I Dried passes both the established and the new industry copper corrosion tests.
Performance & benefits
- Extended oil life · Shell Diala S3 ZX-I Dried is a fully inhibited oil offering outstanding oxidation performance and an extended oil life. Shell Diala S3 ZX-I Dried is also suitable for use in highly loaded applications. Transformer protection · Shell Diala S3 ZX-I Dried is manufactured from a base oil with a very low sulphur content, making it intrinsically non-corrosive towards copper without the need for passivation. System efficiency · The oil's good low-temperature properties ensure adequate heat transfer inside the transformer, starting from even the lowest temperatures. Shell Diala S3 ZX-I Dried is specially dried and handled to achieve a low water content and maintain a high breakdown voltage at the point of delivery. This allows it to be used in many applications without further treatment. Main applications: Transformers · All types of power transformer and application (e.g. generator transformers, reactors, distribution transformers). Electrical equipment · Components such as rectifiers, circuit breakers and switchgear.
- IEC 60296 (Edition 4.0 2012-02): Table 2 Transformer Oil (I) (Inhibited oil) Section 7.1 ("Higher oxidation stability")
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | indeplineste | IEC 60296 |
| Densityla 15°C kg/m3 | 881 | ISO 3675 |
| Densityla 20°C kg/m3 | 878 | ISO 3675 |
| Kinematic viscosityla 40°C mm2/s | 8.0 | ISO 3104 |
| Kinematic viscosityla -30°C mm2/s | 720 | ISO 3104 |
| Flash point (PM)°C | 138 | ISO 2719 |
| Pour point°C | -60 | ISO 3016 |
| Neutralisation valuemg | <0.01 | IEC 62021-1 KOH/g |
| Corrosive sulphur | non-roroziv | DIN 51353 |
| Corrosive sulphur | non-coroziv | IEC 62535 |
| Corrosive sulphur | non-coroziv | Astm D1275 B |
| Tensiunea de strapungere - fara tratarekV | >60 | IEC 60156 |
| Tensiunea de strapungere - dupa tratarekV | >70 | IEC 60156 |
| Factor de disipare Dielectric (DDF) | 0.001 | IEC 60247 |
| Oxidation stability (500 hours) -la 120°C mg °C | 0.02 | IEC 61125 |
| Oxidation stability (500 hours) - Residue% m °C | 0.01 | IEC 61125 |
| Factor de disipare Dielectric (DDF) | 0.005 | |
| Factor de disipare Dielectric (DDF)la 90°C | 0.005 | |
| Inhibitor - DBPC% | Max 0.3 | IEC 60666 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS