On order
Eni Rotra MP 85W-140
API GL-5 EP oil for heavily loaded hypoid drive axles
SAE 85W-140
Specifications
- Brand
- Eni
- Category
- Manual gearbox & axle oils
- Type
- Manual transmission oils
- Viscosity
- SAE 85W-140
- Manufacturer code
- 001285
- Availability
- On order
Manufacturer's description
eni Rotra 85W-140 is a gear lubricant based on high viscosity index mineral oil, with a specific anti-wear additive package. It is intended for certain types of transmission without hypoid gears — the front-wheel drives of vehicles with transverse engines, for instance. More generally, it can be used in all power transmission gearing that is not subject to excessive loads or sliding between the teeth, and for which the manufacturers prescribe an anti-wear lubricant at API GL-3 performance level.
Applications
- Eni Rotra 85W-140 is a mineral-based, high VI gearbox lubricant, with a specific antiwear additivation. It is designed for the lubrication of some types of integrated transmissions (transaxle) without hypoid gears (for instance, front-wheel drive vehicles with transverse engines). More generally, it can be used in all gear trains where power transfer does not entail excessive pressures or tooth load, for which the manufacturer prescribes a lubricant with an API GL-3 performance level for antiwear properties.
Performance & benefits
- Its antiwear properties keep bearings and gear teeth in optimum condition, even after a prolonged operation
- Its chemical stability and resistance to oxidation allow longer lubricant-drain intervals
- Its detergent-dispersant properties help keep impurities in suspension, preventing deposit formation
- It is not corrosive to steel and copper parts, keeping all lubricated items of gearboxes in optimum conditions, preventing corrosion even when in presence of moisture
- Its antifoam qualities prevent excessive formation of air bubbles that could adversely affect the continuity of the lubricant film
- An elevated Viscosity Index ensure a reliable performance of all lubricated parts in a wide interval of operating temperatures
Standards & approvals
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 905 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 28.2 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 410 | ASTM D 445 |
| Viscosity at -12°CmPa·s | 130000 | ASTM D 2983 |
| Viscosity index | 98 | ASTM D 2270 |
| Flash point (COC)°C | 270 | ASTM D 92 |
| Pour point°C | -15 | ASTM D 97 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS