Divinol Mehrzweck-Getriebeöl SAE 80
Multi-purpose GL-4 gear oil for vehicle gearboxes, final drives and transaxle drives
API GL 4
Divinol GL 4 80W-90 is an alloyed high-pressure (EP) gear oil for heavily loaded gears. High-quality base oils and advanced additive technology enable broad use and optimum lubrication, keeping wear and abrasion to a minimum. The oil can be used for normal oil drain intervals in accordance with the OEM's instructions. Its multigrade characteristic solves shifting difficulties such as stiffness, and a distinct improvement can be noted compared with conventional SAE 80 or SAE 90 gearbox oils, particularly at low temperatures. It is intended for manual transmissions requiring API GL-4 performance where an SAE 80W-90 grade is specified. Divinol GL 4 80W-90 meets API GL-4 and the manufacturer states performance in line with MAN 341 E1, MB 235.1 and ZF TE-ML 06L, 08, 16A, 17A, 19A, 19C, all of which are also listed by Divinol Romania.
Gear oil, API GL-4 service level
API's service designation for axle and manual transmission oils.
MAN 341 type E1 — manual gearbox oil
MAN's list of manual gearbox oils; type E1 covers mineral oils at standard drain intervals.
Mercedes-Benz approval 235.1
A Mercedes-Benz operating-fluid approval (BeVo sheet).
ZF TE-ML 06L lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 08 lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 16A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 17A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 19A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 19C lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 80W90 | |
| Colour | L 2,0 | DIN ISO 2049 |
| Viscosity/40°C | 140 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 14.5 mm²/s | ASTM D 7042 |
| Viscosity index | 100 | ASTM D 2270 |
| Density/15°C | 0,895 g/cm³ | DIN EN ISO 12185 |
| Pour point | -30°C | DIN ISO 3016 |
| Flash point (Cleveland) | 200°C | DIN ISO 2592 |
We email you the sheets listed below in a single archive. No account, no order required.