On order
Eni Blasia 150
EP mineral oil for enclosed industrial gears
ISO VG 150
Specifications
- Brand
- Shell
- Category
- Industrial gear oils
- Viscosity
- ISO VG 150
- Manufacturer code
- 001F1174
- Availability
- On order
Manufacturer's description
Shell Omala S2 GX are premium-quality extreme-pressure (EP) oils intended for lubricating industrial gears subjected to arduous operating conditions. Their high load carrying capacity, combined with their anti-friction characteristics, gives the oil superior performance in enclosed gear operation.
Applications
- Enclosed industrial gearsShell Omala S2 GX technology provides an effective extreme-pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel spur, helical or planetary gears, including highly loaded systems with splash or forced-circulation lubrication. Shell Omala S2 GX oils are also suitable for lubricating non-geared applications, including bearings and other steel-on-steel components with splash or forced-circulation systems.
- Shell offers a wide range of products for other gear applications that have their own specific requirements. Shell Omala S4 GXV is recommended for transmission systems where a synthetic lubricant is specified, when the longest service life is required, or when operating in environments with wide temperature variations.
- Shell Omala S5 Wind 320 is recommended for the main gears of wind turbine gearboxes.
- Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1 W are recommended for worm gears
- For automotive gears, an appropriate Shell Spirax oil should be used
- For gear systems or other applications using a filtration unit finer than 10 microns, please consult your local Shell technical advisor and product application specialist before using Shell Omala S2 GX.
- compatible with prevalent paint finishes. Specifications, approvals and recommendations: meets the requirements of:
- Fives Cincinnati: P-77 (ISO 150)Approved or recommended by:
- Flender approval to Flender T 7300Shell Omala S2 GX 150 is approved by Flender for use in Flender helical, bevel, planetary and marine gear units. For the full list of approvals and recommendations, please consult your local Shell Technical Help Desk
- Other applications: Shell offers a wide range of products for other gear applications that have their own specific requirements
Standards & approvals
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Kinematic viscosity @40°Cmm2/s | 150 | ISO 3104 |
| Kinematic viscosity @100°Cmm2/s | 14.8 | ISO 3104 |
| Viscosity index | 97 | ISO 2909 |
| Flash point COC°C | 245 | ISO 2592 |
| Pour point°C | -24 | ISO 3016 |
| Density @15°CKg/m3 | 897 | ISO 12185 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS