Eni Acer 46

Specifications

Brand

Eni

Category

Hydraulic oils

Type

Mineral oils

Viscosity

ISO VG 46

Manufacturer code

002162

Availability

On order

Manufacturer's description

Eni Acer 46 is a lubricant for circulation systems and hydraulic circuits that call for anti-rust and antioxidant properties. Eni Acer 46 is recommended in particular for lubricating plain and rolling bearings, crank mechanisms and toothed couplings that need no anti-wear or EP properties, and for joints and wet clutches outside automotive use.

Applications

• Eni Acer 46 is a lubricant for circulation systems, oleodynamic circuits and air compressors where antirust and antioxidant properties are required. Eni Acer 46 is particularly recommended for lubrication of journal and rolling bearings, crank mechanisms and gear couplings that are not demanding antiwear or E.P. performances, joints and wet clutches not for automotive applications.

Performance & benefits

• Quick separation from water that could accidentally enter the system thanks to optimal demulsive capacity
• Effective protection from rust and corrosion
• Oil film continuity and uncompressibility ensured by a quick antifoam and air release action
• Compatibility with rubber types that are commonly used for seals

Standards & approvals

• ISO 11158 HL

  Hydraulic oil, type H HL — ISO 11158

  Class HL of ISO 11158: a mineral hydraulic oil additised against oxidation and corrosion but without antiwear protection — for low-pressure systems.

• AFNOR NF E 48603 HL

  NF E 48-603 type HL

  Class HL of the French standard: a hydraulic oil additised against oxidation and corrosion, without antiwear protection.

• ISO 12925-1 CKB

  Industrial gear lubricant CKB — ISO 12925

  Class CKB of ISO 12925-1: a mineral oil with antioxidant and anticorrosion additives but no extreme-pressure package, for lightly loaded gear units.

• ANSI/AGMA 9005-E02

  ANSI/AGMA 9005-E02 (2002)

  The 2002 edition of the AGMA enclosed gear drive lubrication practice. Still widely quoted on datasheets although superseded by the 2016 F16 edition.

• ISO 6743/3 DAB

  Lubricant classification DAB — ISO 6743

  The ISO classification of compressor oils; class DAB covers reciprocating compressors at moderate duty and discharge temperature.

• Morgoil rev. 3.0 - 1999

  Morgoil — oil-film bearing oil for rolling mills

  The Morgan — today Primetals — specification for the oils in the oil-film backup roll bearings of rolling mills. Its central demand is rapid water separation at tank temperature, because cooling water inevitably reaches the oil.

• DIN 51506 VCL

  Air compressor oil VCL — DIN 51506

  Class VCL of DIN 51506, with tighter oxidation and coking requirements than VBL, for discharge temperatures up to about 160 °C.

• DIN 51524-1 HL

  Hydraulic oil HL — DIN 51524, part 1

  Part 1 of the standard: HL oils, additised against oxidation and corrosion but without antiwear protection. They are used where pressures are low.

• DIN 51517-2 CL

  Industrial gear oil CL — DIN 51517, part 2

  Part 2: CL oils, additised against oxidation and corrosion but without extreme-pressure additives.

• BS 4231 HSC

  BS 4231 class HSC — hydraulic viscosity grade

  The British standard classifying hydraulic fluids by viscosity; classes HSA–HSE track the ISO VG grades, HSC sitting around ISO VG 32.

• CETOP RP 91 H HL

  CETOP RP 91 H, type HL — hydraulic fluids

  The recommendation of the European oleohydraulics and pneumatics committee for hydraulic fluids; type HL covers inhibited oils without antiwear additives.

Approved for

• ISO
• DIN

Typical characteristics

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

• SDSEN
• SDSRO
• TDSEN
• TDSRO