On order
AGIP Novecento DOT 4
DOT 4 brake fluid for the braking and clutch systems of classic cars
FMVSS 116, DOT 4
Specifications
- Brand
- Eni
- Category
- Brake fluids
- Type
- Brake fluids
- Manufacturer code
- 001655
- Availability
- On order
Manufacturer's description
eni Brake Fluid DOT 4 is a fluid made specifically for disc and drum braking circuits, for ABS, and for hydraulic clutch actuation. It is also recommended wherever the braking system works under severe conditions — motorhomes and commercial vehicles among them. Its high boiling point keeps braking consistent and safe when the system is heavily stressed. The fluid is compatible with rubber components, preserves the tightness of the seals and keeps leakage to a minimum, and its corrosion protection extends the life of the braking circuit's components.
Applications
- Eni Brake Fluid DOT 4 is a high performance hydraulic brake fluid for use in automotive disc or drum brakes, ABS and clutch systems. The product provides good performance levels for use in passenger cars, motorcycles and commercial vehicles, both for current and previous model generation.
Performance & benefits
- Eni Brake Fluid DOT 4 has a high boiling point that guarantee consistent and safe brake performance under severe stress condition of the braking system
- It is compatible with rubber components, it preserves the tightness of the gaskets and it reduces leakage and loss of fluid to a minimum
- It provides an excellent corrosion protection and it guarantees the extended life and reliability of brake system components
- Due to the high oxidation resistance, Eni Brake Fluid DOT 4 keeps the chemical/physical characteristics of the fluid unchanged for a long time
- The product additivation technology has been designed to contain the adverse effects of thermo-oxidative phenomena
Standards & approvals
SAE J 1704
SAE J1704 — DOT 4 brake fluid
The SAE standard for DOT 4 brake fluids, with a higher boiling point than DOT 3, particularly once the fluid has taken up water.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 20°Ckg/m³ | 1040 | ASTM D 1298 |
| Viscosity at -40°Cmm²/s | 1000 | ISO 4925/05-5.1 |
| Dry boiling point°C | 260 | ISO 4925/05-5.2 |
| Wet boiling point°C | 163 | ISO 4925/05-5.2.6 |
| Flash point°C | 125 | ISO 4925/05-5.2 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS