On order
Shell PANOLIN S2 Hydraulic DU EAL 46
Biodegradable HEES synthetic hydraulic fluid for environmentally sensitive areas
ISO VG 46
Specifications
- Brand
- Shell
- Category
- Biodegradable lubricants (ECL)
- Manufacturer code
- 007A0738
- Availability
- On order
Manufacturer's description
Advanced Synthetic Biodegradeable Extreme Pressure Grease. A fully synthetic biodegradeable grease for use in applications where environmental acceptability is required. This grease is based upon a lithium hydroxystearate soap thickener and is fortified with extreme pressure, antioxidant, anti-wear and anti-rust additives.
Applications
- Plain and rolling element bearings and general industrial lubrication.
- Operation over the temperature range -35 0 C to 100 0 C for bearings operating at 75% of the maximum rated speed (can withstand up to 120 0 C intermittently).
Performance & benefits
- Good oxidation and mechanical stabilityResists the formation of deposits caused by oxidation at high operating temperatures and maintains consistency, reducing leakage.
- Good corrosion resistance characteristicsEffective protection in hostile environments.
- Lower Environmental ImpactRecommended for use in environmentally sensitive areas: An ‘environmentally acceptable lubricant’ as defined by the USA EPA 2013 Vessel General Permit and offers reduced impact of leak or accidental spillage into the environment when used in marine environments compared to conventional mineral oils. Readily biodegradable - biodegraded by over 60% after 28 days in the OECD 301 B carbon dioxide evolution test. Low Ecotoxicity - Classified as ‘not harmful’ to bacteria, algae, freshwater and marine invertebrates, and fish when tested as water- accommodated fractions (WAFs) according to OECD and EPA test guidelines.
- Meets requirement of United States Environmental Protection Agency’s (EPA) 2013 vessel general permit (VGP)
Standards & approvals
Swedish Standard SS 15 54 70
SS 15 54 70 — environmental requirements for greases (Sweden)
The counterpart of the Swedish SS 15 54 34 standard applied to greases: high biodegradability, low aquatic toxicity, and no environmentally hazardous classification.
Also listed
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| NLGI consistency | 2 | |
| Soap type | Lithium Hydroxystearate | |
| Base oil (type) | Ester | |
| Kinematic viscosity @40°CcSt | 120 | IP 71 / ASTM D445 |
| Kinematic viscosity @100°CcSt | 19 | IP 71 / ASTM D445 |
| Cone penetration, worked @25°C0.1mm | 280 | IP 50 / ASTM D217 |
| Dropping point°C | 180 | IP 132 / ASTM D566 - 76 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS