On order
Shell PANOLIN S2 Hydraulic DU EAL 46
Biodegradable HEES synthetic hydraulic fluid for environmentally sensitive areas
ISO VG 46
Specifications
- Brand
- Shell
- Category
- Biodegradable lubricants (ECL)
- Manufacturer code
- 007A0431
- Availability
- On order
Manufacturer's description
EP universal grease - readily biodegradable, synthetic esters. Shell PANOLIN S5 Grease EAL A600P 1 is a high performance readily biodegradable grease particularly suited for use in environmentally sensitive areas where eco-label compliance is required including exposed applications including wire-ropes and open gears in marine and hydropower industry, wicket gates controlling flow of water to turbines, dams and pipelines. This product is based upon an anhydrous calcium soap thickener. Shell PANOLIN S5 Grease EAL A600P 1 is designed to offer excellent resistance to water washout, good load carrying capacity and anti-corrosion properties.
Performance & benefits
- Wear ProtectionGood load carrying and anti-corrosion properties provide protection over a wide range of temperatures and conditions and ensure long component life.
- Maintaining system efficiencyShell PANOLIN S5 Grease EAL A600P 1 has excellent resistance to water washout. Excess water can be easily drained from lubrication systems; which helps to extend the life of equipment and ensures efficient lubrication of contact areas.
- Wide temperature rangeShell PANOLIN S5 Grease EAL A600P 1 has excellent low temperature characteristics with good temperature range, operating temp -50 degC to +120 degC (maximum 130degC)
- Lower Environmental ImpactAn ‘environmentally acceptable lubricant’ as defined by the USA EPA 2013 Vessel General Permit and EU Ecolabel. Offers reduced impact of leak or accidental spillage into the environment when used in marine environments compared to conventional mineral oils. Readily biodegradable and has a low ecotoxicity in accordance with requirements of EU Ecolabel (EEL)
- Meets requirement of United States Environmental Protection Agency’s (EPA) 2013 vessel general permit (VGP)
Standards & approvals
Swedish Standard SS 15 54 70
SS 15 54 70 — environmental requirements for greases (Sweden)
The counterpart of the Swedish SS 15 54 34 standard applied to greases: high biodegradability, low aquatic toxicity, and no environmentally hazardous classification.
Also listed
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Thickener type | Anhydrous Calcium | |
| Base oil (type) | Ester | |
| AppearanceVisual | Smooth | |
| ColourVisual | Yellow | |
| NLGI consistency | 1 | |
| Dropping point°C minimum | 140 | ASTM D2265 |
| Kinematic viscosity @40°Cmm2/s | 560 | ASTM D7042 |
| Kinematic viscosity @100°Cmm2/s | 58 | ASTM D7042 |
| Penetration worked25°C/60 strokes 0.1mm | 310 - 340 | ASTM D217 |
| Four Ball Extreme pressure Test, Weld loadN minimum | 3 200 | ASTM D2596 |
| Four Ball Wear Test40kg; 1h; 75°C; mm scar maximum | 0.7 | ASTM D2266 1200rpm |
| Water Resistance @90°C3 hours maximum | 1 | DIN 51807 |
| Water Washout Test % loss @79°Cmaximum | 5 | ASTM D1264 |
| Test EMCOR salt Waterrating | 2-2 | IP 220 |
| Low Temperature Flow Pressurembar | 1 400 | DIN 51805 |
| Lubricating Ability SKF R2F B @120°C | Pass | |
| Lower and Upper Application Temperature°C | -50 - 120 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS