On order
Eni Acer MP 320
Anti-wear circulating oil for rolling-mill bearings and gears
ISO VG 320
Specifications
- Brand
- Eni
- Category
- Circulating & slideway oils
- Type
- Mineral oils
- Viscosity
- ISO VG 320
- Manufacturer code
- 002153
- Availability
- On order
Manufacturer's description
Eni Acer 320 is a lubricant for circulation systems and hydraulic circuits that call for anti-rust and antioxidant properties. Eni Acer 320 is recommended in particular for lubricating plain and rolling bearings, crank mechanisms and toothed couplings that need no anti-wear or EP properties, and for joints and wet clutches outside automotive use.
Applications
- Eni Acer 320 is a lubricant for circulation systems and air compressors where antirust and antioxidant properties are required. Eni Acer 320 is particularly recommended for lubrication of journal and rolling bearings, crank mechanisms and gear couplings that are not demanding antiwear or E.P. performances, joints and wet clutches not for automotive applications.
Performance & benefits
- Quick separation from water that could accidentally enter the system thanks to optimal demulsive capacity
- Effective protection from rust and corrosion
- Oil film continuity and uncompressibility ensured by a quick antifoam and air release action
- Compatibility with rubber types that are commonly used for seals
Standards & approvals
DIN 51506 VBL
Air compressor oil VBL — DIN 51506
Class VBL of DIN 51506: an inhibited mineral oil for compressors with discharge air temperatures up to about 140 °C.
ANSI/AGMA 9005-E02
ANSI/AGMA 9005-E02 (2002)
The 2002 edition of the AGMA enclosed gear drive lubrication practice. Still widely quoted on datasheets although superseded by the 2016 F16 edition.
Morgan Morgoil rev. 1.1 - 2005
Morgoil — oil-film bearing oil for rolling mills
The Morgan — today Primetals — specification for the oils in the oil-film backup roll bearings of rolling mills. Its central demand is rapid water separation at tank temperature, because cooling water inevitably reaches the oil.
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 905 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 320 | ASTM D 445 |
| Viscosity index | 96 | ASTM D 2270 |
| Flash point COC°C | 281 | ASTM D 92 |
| Pour point°C | -6 | ASTM D 5950 |
| Demulsibility at 82°Cmins | 20 | ASTM D 1401 |
| N.N.mgKOH/g | 0.08 | ASTM D 974 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS