On order
AeroShell Turbine Oil 2
2 mm²/s mineral turbine oil for jet engines
Echivalent cu AIR 3516/A (French)
Specifications
- Brand
- Shell
- Category
- Aviation turbine oils
- Manufacturer code
- 001A0083
- Availability
- On order
Manufacturer's description
Synthetic lubricating oil for aircraft turbine engines. AeroShell Turbine Oil 500 is a 5 mm2/s synthetic hindered ester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and metal passivation.
Applications
- AeroShell Turbine Oil 500 was developed essentially to meet the requirements of Pratt & Whitney 521 Type II and MIL-L-23699 specifications and is entirely suitable for most civil and military engines requiring this class of lubricant. AeroShell Turbine Oil 500 is approved for use in a wide range of turbine engines as well as the majority of accessories.
- With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification MIL-PRF-23699, AeroShell Turbine Oil 500 was approved as a SPC (Standard Performance Capability) oil. AeroShell Turbine Oil 500 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.
Performance & benefits
- Pratt & Whitney : APS Series for 5cSt oils, PW 901, PW980.
Standards & approvals
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Oil type | Synthetic ester | |
| Kinematic viscosity @100°Cmm2/s | 5.11 | ASTM D445 |
| Kinematic viscosity @40°Cmm2/s | 25.40 | ASTM D445 |
| Kinematic viscosity @-40°Cmm2/s | 9 215 | ASTM D2532 |
| Flash point (Cleveland Open Cup)°C | 264 | ASTM D92 |
| Pour point°C | <-54 | ASTM D5950 |
| Total aciditymgKOH/g | 0.11 | SAE-ARP-5088 |
| Evaporation loss (6.5 hrs) @204°C% m | 3 | ASTM D972 |
| Foaming tendencyml | Passes | ASTM D892 |
| Thermal Stability / Corrosivitymg/cm | Passes | FED-STD-791 |
| Thermal Stability / Corrosivity% | 1.42 | FED-STD-791 |
| Thermal Stability / CorrosivitymgKOH/g | 1.9 | FED-STD-791 |
| Ryder Gear Test, Relative% | Passes | FED-STD-791 |
| Bearing test rig Type 1 1/2100hrs | Passes | FED-STD-791 |
| Bearing test rig Type 1 1/2 @40°C% | Passes | FED-STD-791 |
| Bearing test rig Type 1 1/2mgKOH/g | Passes | FED-STD-791 |
| Bearing test rig Type 1 1/2g | Passes | FED-STD-791 |
| Trace metal content | Passes | ASTM D5185 D6595 |
| Sedimentmg/l | 0.68 | FED-STD-791 M.3101 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS