Brand
Eni
Tip
Uleiuri de motor în doi timpi
Normă principală
Cod producător
002856

Eni CLADIUM 50 SAE 30

Ulei de sistem pentru motoare diesel cu cap de cruce, și pentru tubul etambou

Specificații

Brand
Eni
Tip
Uleiuri de motor în doi timpi
Cod producător
002856
Disponibilitate
La comandă

Descriere de la producător

Eni CLADIUM 50 SAE 30 este un lubrifiant marin formulat cu uleiuri de bază de calitate ridicată; caracteristicile lui detergente, date de aditivi specifici, îl fac potrivit ca ulei de sistem în motoarele diesel mari cu cap de cruce și pistoane răcite cu ulei. Se poate folosi și ca lubrifiant pentru tubul etambou.

Aplicații și utilizări

  • Eni CLADIUM 50 SAE 30 is marine lubricant formulated with high quality base stocks, its detergent characteristic deriving from the use of specific additives make it suitable to be used as system oil in large crosshead Diesel engines with oil-cooled pistons. It is can also be used as a stern tube lubricant.

Performanțe și beneficii

  • Eni CLADIUM 50 SAE 30 has high detergent and dispersant properties capable of effectively prevent the formation of deposits in the cooling system of the pistons and in the crankcase
  • Its alkaline properties ensure effective protection of the internal surfaces of the engine protecting them from corrosive products
  • Eni CLADIUM 50 SAE 30 with its antiwear properties ensure long life of engine components, thus reducing servicing and overhaul requirements. Its antifoam properties minimize the formation of air bubbles which could adversely affect lubricant film continuity
  • Eni CLADIUM 50 SAE 30 has high demulsibility properties which permit the separation by centrifuging of any water accidentally entering in the engine
  • Its antirust properties efficiently combat the corrosive effects of moisture and salinity
  • Eni CLADIUM 50 SAE 30 is characterized by a remarkable stability of its characteristics, in particular its resistance to thermal cracking and oxidation, allowing the prolonged permanence of the product at high temperatures.

Aprobat pentru

  • SAE

Se poate folosi pe

Caracteristici tehnice

ProprietateValoare tipicăMetodă
Densitate la 15°Ckg/m³899ASTM D 4052
Viscozitate la 100°Cmm²/s12.1ASTM D 445
Viscozitate la 40°Cmm²/s106ASTM D 445
Indice de viscozitate99ASTM D 2270
Punct de inflamabilitate (COC)°C234ASTM D 92
Punct de curgere°C-18ASTM D 97
B. N.mg KOH/g5ASTM D 2896

Documentație completă

Îți trimitem pe email fișele de mai jos, într-o singură arhivă. Fără cont și fără comandă.

  • SDSEN
  • TDSENnoiembrie 2018

Unde trimitem fișierele?

Trimitem arhiva la adresa de mai jos. E singurul câmp de care avem nevoie — restul ne ajută să răspundem dacă lipsește o fișă.

Ce primești

    Str. Soporului, nr. 12, Cluj-NapocaContactDespre noi
    EN