On order
Eni Alisma 32 PV
Turbine preservation oil, for first fill and for storage
ISO 8068 TSA
Specifications
- Brand
- Eni
- Category
- Turbine oils
- Type
- Mineral oils
- Viscosity
- ISO VG 80
- Manufacturer code
- 002613
- Availability
- On order
Manufacturer's description
eni OTE 80 EP is intended in particular for lubricating every part of marine steam turbines — bearings, gears, governing systems and the like. It can also be used in hydraulic installations and for lubricating air compressors. Note: other ISO VG grades of eni OTE EP, meeting specifications drawn up for industrial turbines, are available on request.
Applications
- Eni OTE 80 is a lubricant specifically designed for use in steam and gas turbine applications. It's based on high quality base-stocks with specially chosen additives to provide excellent thermal-oxidative, rapid air release and excellent demulsibility that permits water to separate readily from the oil.
Performance & benefits
- Prolongs oil charge life extending re-lubrication intervals
- Ensures good lubrication film
- Increases turbine operation reliability
- Maximizes water removal system efficiency
- Meets military specifications
Standards & approvals
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 866 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 75 | ASTM D 445 |
| Viscosity index | 107 | ASTM D 2270 |
| Flash point (COC)°C | 245 | ASTM D 92 |
| Pour point°C | -12 | ASTM D 97 |
| N.N.mg KOH/g | 0.10 | ASTM D 974 |
| Trattenimento ariamins | 6 | DIN 51381 |
| Rust test/B | pass | ASTM D 665 |
| Copper corrosion | 1A | ASTM D 130 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS