On order
Eni Aquamet 205
Cutting fluid free of secondary amines, boron and chlorine, for yellow alloys and stainless steel
ISO 6743/7 MAB
Specifications
- Brand
- Eni
- Category
- Metalworking fluids
- Type
- Water-miscible cooling and lubricating fluids
- Manufacturer code
- 007541
- Availability
- On order
Manufacturer's description
Eni Aquamet 700 EXTREME is a cutting fluid with excellent technological characteristics, free of bactericide and boron, formulated with EP, anticorrosive, anti-rust and detergent agents. Particularly suitable for severe cutting operations such as: deep drilling, tapping, threading and MAPAL boring on aluminum and its alloys, steels and stainless steel, yellow metals; it is not suitable for machining cast iron. The particular formulation makes the product suitable also in light plastic deformation operations on aluminum and steel sheets.
Applications
- Eni Aquamet 700 EXTREME is a cutting fluid with excellent technological characteristics, free of bactericide and boron, formulated with EP, anticorrosive, anti-rust and detergent agents. Particularly suitable for severe cutting operations such as: deep drilling, tapping, threading and MAPAL boring on aluminum and its alloys, steels and stainless steel, yellow metals; it is not suitable for machining cast iron. The particular formulation makes the product suitable also in light plastic deformation operations on aluminum and steel sheets.
Performance & benefits
- Free of bactericide, boron and secondary amines for a lower ecotoxicological impact and better condition of the working environment
- Excellent cutting, cooling and lubricating capacity for less tool wear and better surface finishing of the workpieces
- Low foam formation, even under high pressure delivery and in a wide range of water hardness (optimal range: 15-40°F)
- Excellent emulsion stability, reduction of the frequency of maintenance operations
- Particularly suitable for machining aluminum and its alloys
- Excellent detergent property to maintain clean the machine tool, equipment and workpieces
Standards & approvals
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | |
| Density at 20°Ckg/m³ | 950 | ASTM D 1298 |
| Emulsion Appearance (3%, Water 20°F) | milky | |
| pH emuls. 3% | 9.0 | ASTM D 1287 |
| Corrosion on paper | pass at 5% | DIN 51360 |
| Corrosion | pass at 5% | IP 125 |
| Refractometric factor | 1.0 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS