Mobilube HD-A 85W-90
Heavy-duty gear oil for manual gearboxes and axles, API GL-5, ZF TE-ML 07A
SAE 85W-90
TUTELA TRANSMISSION STARGEAR AX (PLI code 77252) is a lubricant for the axles of cars and commercial vehicles, especially Mercedes-Benz, that allows maximum protection of the mechanical parts during use at high temperatures and under severe operating conditions. Its modern formulation ensures protection against wear, oxidation and rust, while the viscosity characteristics allow rapid and safe lubrication during cold starts and operation at low temperatures. The amber SAE 85W-90 fluid has a kinematic viscosity of 17 cSt at 100°C, a viscosity index of 95, a pour point of -30°C and a flash point of 215°C, with foam limited to traces. The product meets API GL-5 and MIL-L-2105 D, holds the MB-Approval 235.0, is suitable for RENAULT applications where API GL-5 is recommended, covers ZF TE-ML 16C, 17B, 19B and 21A and meets MAN 342 Type M1 performance. Supplied in 20-litre packs; always check the axle manufacturer's requirements before use.
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
Mercedes-Benz approval 235.0
A Mercedes-Benz operating-fluid approval (BeVo sheet).
ZF TE-ML 17B lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 19B lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 21A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
MIL-L-2105D — EP gear and axle oil
The US military specification for extreme-pressure gear oils, in practice equivalent to API GL-5. Superseded by MIL-PRF-2105E and then SAE J2360.
| Property | Typical value | Method |
|---|---|---|
| Appearance | B&C | |
| Colour | AMBER | |
| Density 15°Cg/cm³ | 0.900 | ASTM D 4052 |
| Viscosity @ 100°CcSt | 17 | ASTM D 445 |
| Viscosity @ 40°CcSt | 189 | ASTM D 445 |
| Viscosity index | 95 | ASTM D 2270 |
| Viscosity @ -12°CcPs | 31000 | ASTM D 2983 |
| Pour point°C | -30 | ASTM D 97 |
| Flash point Cl. O. C.°C | 215 | ASTM D 92 |
| Foam @ 24°Ccc/s | TRACES/0 | ASTM D 892 |
We email you the sheets listed below in a single archive. No account, no order required.