Eni Rotra Multigear 75W-80
EP oil for heavily loaded manual gearboxes with intarder or retarder
SAE 75W-80
PETRONAS Tutela MTF 700 HD is a premium, fully synthetic manual transmission fluid for buses, coaches and commercial vehicles, delivering extended drain intervals and total protection even in the most severe conditions for today's manual and automated transmissions, with or without intarder or retarder. Its wide coverage of major manufacturer specifications, thanks to extensive bench- and field-testing, makes it suitable for use in virtually all heavy-duty manual and automated transmissions. It meets the stringent requirements of most OEM transmissions, approved by MAN and ZF, fitted with carbon, molybdenum or traditional synchronizer materials, which helps reduce warehouse complexity and limit possible damage from incorrect oil selection. Benefits include fuel-economy performance from optimised transmission efficiency and lower fluid viscosity, extended drain interval and transmission life through exceptional thermal and oxidation stability, enhanced shear stability, and excellent anti-wear, gear and bearing protection, plus outstanding synchronizer performance, exceptional low-temperature viscosity and significantly reduced transmission noise. It meets API GL-4, Bosch/ZF TE-ML 08 specifications, with MAN 341 Type Z4, ZF TE-ML 01L/02L/16K, DAF, Eaton Europe, IVECO 18-1807 Class MGS1, Renault technical note B0032/2 Annex 3 and Volvo 97307 approvals.
Gear oil, API GL-4 service level
API's service designation for axle and manual transmission oils.
ZF TE-ML 08 lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 01L lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 02L lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 16K lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
Volvo 97307 — engine oil
The Volvo part number under which the engine oil for a given VDS specification is ordered; it identifies the product in the Volvo catalogue rather than a separate norm.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Density @15°Cg/cm³ | 0.860 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 9.6 | ASTM D 445 |
| Kinematic viscosity @40°Cmm²/s (cSt) | 59 | ASTM D 445 |
| Viscosity index | 156 | ASTM D 2270 |
| Brookfield Viscosity @-40°CmPa.s (cP) | 63000 | ASTM D 2983 |
| Pour point°C | -42 | ASTM D 97 |
| Flash point COC°C | 236 | ASTM D 92 |
We email you the sheets listed below in a single archive. No account, no order required.