On order
Eni Grease LCX 1.5/460
Synthetic NLGI 1.5 EP grease for heavily loaded low-speed gears
DIN 51825 KPHC 1,5R -40
Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Lithium-complex greases
- Manufacturer code
- 004977
- Availability
- On order
Manufacturer's description
The eni Grease LCX products are top-tier greases, formulated to meet the most severe lubrication demands across several industries: wind power, metallurgy, cement plants, paper machines and glassworks. eni Grease LCX 2/220 is a multipurpose lithium complex EP grease of NLGI 2 consistency, formulated with a special ISO VG 220 synthetic base oil. It is recommended in particular for lubricating bearings and components working under very severe conditions, at high temperatures and loads, such as those found in paper machines, rolling mill bearings and couplings. Recommended temperature range: -40 °C / +160 °C.
Applications
- Eni Grease LCX 2/220 is a lithium complex grease, formulated with synthetic base oil of viscosity ISO VG 220 that allow the grease to operate at very low temperatures. The particular combination of anti-wear, EP, anticorrosive and anti-oxidant additives guarantees excellent performance in severe operating conditions such as high loads and in presence of vibrations. In addition, the synthetic base gives a high thermal and oxidative stability over time, allowing a reduction of downtime cases and maintenance costs. Eni Grease LCX 2/220 is recommended for high temperature and high load applications such as lubrication of bearings and other parts operating under severe conditions (joints, bearings of paper mills, rolling mill bearings, flat bearings and rolling bearings exposed to water washout).
Performance & benefits
- Suitable for applications at high and low temperature thanks to the nature of the synthetic base and the very high dropping point
- Extension of service life and relubrication intervals, even in the presence of strong mechanical and thermal stresses
- Excellent adhesiveness and resistance to water washout. Can be used in humid environments and in the presence of water
- Good loads resistance
- High anti-rust and anti-corrosion protection and compatibility with all types of metals both ferrous and non-ferrous
Standards & approvals
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | gray/beige opaque | |
| Thickener type | litio complesso | |
| Consistency (NLGI Grade) | 2 | ASTM D 217 |
| Penetration at 60 double strokedmm | 280 | ASTM D 217 |
| Base oil type | sintetico | |
| Base oil viscosity at 40°Cmm²/s | 220 | ASTM D 7042 |
| Dropping point°C | 290 | ASTM D 566 |
| EMCOR Test in distilled Water | 0/0 | IP 220 |
| Corrosion | supera | ASTM D 1743 |
| Copper corrosion | 1a | ASTM D 4048 |
| Timken OK loadlbs | >45 | ASTM D 2509 |
| Temperature range°C | -40/+160 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- TDS
- TDS