Divinol Lithogrease G 421
Semi-synthetic lithium complex grease for bearings under extreme loads, NATO code G 421
Specifications
- Brand
- Divinol
- Category
- Industrial greases
- Manufacturer code
- 20160
- Availability
- On order
Manufacturer's description
Divinol Lithogrease G 421 is a high-quality, semi-synthetic lubricating grease based on a lithium complex soap, classified KP 2 P-30 according to DIN 51 825 and ISO-L-XCEHB 2 according to ISO/DIS 6743-9. It is work stable, water resistant, and resistant to corrosion and oxidation, offering very good wear protection and good pressure absorption capacity. The grease is used above all for the lubrication of roller and plain bearings under extreme mechanical and thermal loads, such as wheel hubs and clutch release bearings. Thanks to its synthetic oil content, Divinol Lithogrease G 421 achieves longer service lives than mineral-oil-based greases, so relubrication intervals can be extended and grease consumption reduced. Divinol Lithogrease G 421 complies with the requirements of TL 9150-0075/2 of the German Armed Forces and is approved under NATO code G 421.
Applications
- Divinol Lithogrease G 421 is especially used for the lubrication of mechanically and thermally extreme-loaded roller and slide bearings, e. g. wheel hubs and release bearings of couplings. Due to its content of synthesis oil Divinol Lithogrease G 421 offers longer service lives compared to mineral oil based greases. Thus, the additional lubrication intervals can be prolonged which in consequence reduces the consumption of grease.
Performance & benefits
- high quality, semi-synthetic lithium complex soap grease
- work stable
- water resistant
- corrosion and oxidation resistant
- offers a very good wear protection
- shows goods pressure absorption capacity
- classification KP 2 P-30 as per DIN 51 825
- classification ISO-L-XCEHB 2 as per ISO/DIS 6743-9
Standards & approvals
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour / Appearance | yellow | |
| Thickening agent | Lithium complex soap | |
| Operating Temperature range | -35°C - +160°C | |
| NLGI-class | 2 | DIN 51 818 |
| Base oil viscosity/40°C | 130 mm²/s | ASTM D 7042 |
| Water content | < 0,2 % | DIN 51 777/T1 |
| Dropping point | > 220 °C | DIN ISO 2176 |
| Worked penetration/0.1mm, 60 double strokes | 280 | DIN ISO 2137 |
| Water resistance | Evaluation level 1 | DIN 51807-1 |
| Flow pressure at -30°C | 600 hPa | DIN 51 805 |
| Oil separation | ca. 2,5 % | DIN 51 817 |
| Corrosion protection behaviour (EMCOR-Test) | 0/0 | DIN 51 802 |
| Oxidation resistance 100°C/100h | 0.2 bar | DIN 51 808 |
| VKA Welding load | 4000 N | DIN 51 350/T4 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS