Divinol
On orderDivinol Fett L 0
NLGI 0 lithium grease for gears and automatic central lubrication systems
ISO
Divinol Fett L 3
NLGI 3 lithium grease for transport rollers and wheels, meets VW TL 735 X
Specifications
- Brand
- Divinol
- Category
- Industrial greases
- Manufacturer code
- 85560
- Availability
- On order
Manufacturer's description
Divinol Fett L 3 is a lithium soap lubricating grease with a high mechanical load capacity and good water resistance. Its firmer NLGI 3 consistency helps it stay in place in bearings that are exposed to centrifugal forces or frequent movement. It corresponds to the requirements of the VW standard TL 735 X. The grease is used for the lubrication of slide and roller bearings, even those with a considerable proportion of sliding friction, and is especially suitable for lubricating transport rollers and wheels. It serves motor vehicles, construction machines, agricultural and industrial machines of all kinds over a wide operating temperature range, and remains easily pumpable even through long lubrication lines. Divinol Fett L 3 is classified KP 3 K-30 as per DIN 51 825 and ISO-L-XCCHB 3 as per ISO/DIS 6743-9.
Applications
- Divinol Fett L 3 is used for the lubrication of slide and roller bearings even with a quite high part of sliding friction. It is especially suitable for the lubrication of transport rollers and wheels. The product is used for motor vehicles, construction machines, agricultural and industrial machines of all kinds in a wide operating temperature range. Divinol Fett L 3 is easily pumpable even through long lubrication lines.
Performance & benefits
- Lithium soap lubricating grease
- high mechanical load capacity
- water resistant
- corresponds tp the requirements of the VW-standard TL 735 X
- classification KP 3 K-30 as per DIN 51 825
- classification ISO-L-XCCHB 3 as per ISO/DIS 6743-9
Standards & approvals
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour / Appearance | brownish, smooth | |
| Thickening agent | Lithium soap | |
| Operating Temperature range | -30°C - +130°C | |
| NLGI-class | 3 | DIN 51 818 |
| Base oil viscosity/40°C | 100 mm²/s | ASTM D 7042 |
| Water content | < 0,1 % | DIN 51 777/T1 |
| Dropping point | 190 °C | DIN ISO 2176 |
| Worked penetration/0.1mm, 60 double strokes | 240 | DIN ISO 2137 |
| Water resistance | Evaluation level 1 | DIN 51807-1 |
| Flow pressure at -30°C | 1100 hPa | DIN 51 805 |
| Oil separation | 1,5 % | DIN 51 817 |
| Corrosion protection behaviour (EMCOR-Test) | 0/0 | DIN 51 802 |
| Corrosion effect on Copper 24h/100°C | Corrosion degree 2 | DIN 51 811 |
| Oxidation resistance 100°C/100h | 0.2 bar | DIN 51 808 |
| VKA Welding load | 2600 N | DIN 51 350/T4 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS