Divinol Fett CaX 2
Calcium complex grease for highly loaded bearings exposed to dust and water
Specifications
- Brand
- Divinol
- Category
- Industrial greases
- Manufacturer code
- 24730
- Availability
- On order
Manufacturer's description
Divinol Fett CaX 2 is a work-stable lubricating grease based on a calcium complex soap. It offers very good wear protection, a high level of corrosion protection, and is resistant to both water and oxidation, so it keeps performing where simpler greases wash out or break down. It is designed for the lubrication of thermally and mechanically highly loaded roller and slide bearings in all kinds of machinery, including ventilators, pumps, presses and calenders. The grease is especially suitable for lubrication points exposed to heavy dust and water, as typically found in the steel and cement industries, where it ensures reliable lubrication and long-lasting protection against corrosion. Divinol Fett CaX 2 is classified KP 2 N-30 as per DIN 51 825 and ISO-L-XCDHB 2 as per ISO/DIS 6743-9 (NLGI grade 2).
Applications
- Divinol Fett CaX 2 is designed for the lubrication of thermally and mechanically high-charged roller and slide bearings in all kinds of machines, ventilators, pumps, presses, calendars etc. It is especially suitable for lubricating points under strong influence of dust and water as e.g. in the steel industry and cement industry. Divinol Fett CaX 2 ensures a reliable lubrication and offers a long-lasting protection against corrosion.
Performance & benefits
- work stable calcium complex soap grease
- offers very good wear protection
- high corrosion protection
- water- and oxidation-resistant
- classification KP 2 N-30 as per DIN 51 825
- classification ISO-L-XCDHB 2 as per ISO/DIS 6743-9
Standards & approvals
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour / Appearance | brown | |
| Thickening agent | Calcium complex soap | |
| Operating Temperature range | -30°C - +150°C | |
| NLGI-class | 2 | DIN 51 818 |
| Base oil viscosity/40°C | 100 mm²/s | ASTM D 7042 |
| Water content | < 0,2 % | DIN 51 777/T1 |
| Dropping point | > 250 °C | DIN ISO 2176 |
| Worked penetration/0.1mm, 60 double strokes | 290 | DIN ISO 2137 |
| Water resistance | Evaluation level 1 | DIN 51807-1 |
| Flow pressure at -30°C | 1200 hPa | DIN 51 805 |
| Corrosion protection behaviour (EMCOR-Test) | 1/1 | DIN 51 802 |
| Corrosion effect on Copper 24h/100°C | Corrosion degree 1 | DIN 51 811 |
| Oxidation resistance 100°C/100h | 0.3 bar | DIN 51 808 |
| VKA Welding load | 2200 N | DIN 51 350/T4 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS