Specifications
- Brand
- Caterpillar (Cat)
- Category
- Hydraulic oils
- Manufacturer code
- 1002
- Availability
- On order
Manufacturer's description
Cat Hydraulic Oil (Hydo) SAE 10W is a hydraulic fluid from Caterpillar's Cat Fluids range. Its safety data sheet describes it simply as base oil and additives, intended for use as a hydraulic fluid, at the SAE 10W viscosity grade. No official Caterpillar technical data sheet is held in this folder for this product, so its full viscosity profile, drain interval recommendations and performance properties are not documented here. Per its safety data sheet it is an amber liquid with a flash point above 226°C (439°F) and a relative density of about 0.88 at 15°C. Given the limited published data, users should confirm current specifications, part numbers, pack sizes and whether this product has been superseded by a newer Cat HYDO oil, with Bergerat Monnoyeur before use.
Applications
- - Intended use (per safety data sheet): Hydraulic fluid
Typical characteristics
| Property | Typical value |
|---|---|
| Physical state | Liquid |
| Colour | Amber |
| Odour | Characteristic |
| Initial Boiling point / and Boiling Range | > 316°C (600°F) [Estimated] |
| Flash point [Method] | >226°C (439°F) [ASTM D-92] |
| Vapour pressure | < 0.013 kPa (0.1 mm Hg) at 20 °C [Estimated] |
| Relative density (at 15 °C) | 0.88 [ASTM D4052] |
| Solubility(ies) | water Negligible |
| Viscosity | 37 cSt (37 mm2/sec) at 40ºC \ |
| Pour point | -33°C (-27°F) [ASTM D97] |
| DMSO Extract (Mineral oil only), IP-346 | < 3 %wt |
| Product name | CAT HYDRAULIC OIL (HYDO) SAE 10W |
| Revision date | 21 Mar 2013 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS