On order
Shell Helix Diesel Ultra AB-L 5W-30
Fully synthetic oil for Mercedes-Benz diesel engines with particulate filters
SAE 5W-30
Specifications
- Brand
- Shell
- Category
- Engine oils
- Viscosity
- SAE 5W-30
- Manufacturer code
- 001D7542
- Availability
- On order
Manufacturer's description
Maximises performance right up to the next oil change. Shell Helix Ultra AG is a latest-generation, fully synthetic engine oil designed specifically to meet the needs of virtually all Opel and Vauxhall gasoline and diesel engines. Approved by these manufacturers for normal and extended service. It contains Shell's latest active cleansing technology to continuously prevent dirt and deposit build-up, delivering maximum performance right up to the next oil change.
Applications
- Meets the General Motors requirements for the dexos2™ specification.
Performance & benefits
- Long-term oxidation stabilityFor extended oil drain interval performance.
- Shell's latest active cleansing technologyDelivers outstanding engine cleanliness, acting continuously to remove and prevent deposits on engine surfaces.
- Better fuel efficiency and easy engine starting in low-temperature conditions. Specially selected synthetic base oils, low evaporation losses
- Reduces oil volatility and therefore oil consumption. The need to top up with oil is consequently reduced.
- "Low SAPS" formulationEmissions system protection.
- Special air release controlOptimised hydraulic control system.
- Low sulphur contentFor catalyst protection.
- Minimises engine vibration and noiseMore comfortable and quieter operation.
- Low viscosity, rapid oil flow and reduced friction. Better fuel efficiency and easy engine starting in low-temperature conditions
- Specially selected synthetic base oils, low evaporation losses. Reduces oil volatility and therefore oil consumption. The need to top up with oil is consequently reduced
Standards & approvals
ACEA C3
ACEA C3 oil sequence
ACEA's sequence for catalyst-compatible, low-SAPS engines.Source
Also listed
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| SAE viscosity grade | 5W-30 | |
| Kinematic viscosity @40°Cmm2/s | 69.5 | EN ISO 3104 |
| Kinematic viscosity @100°Cmm2/s | 11.7 | EN ISO 3104 |
| Viscosity index | 164 | ISO 2909 |
| Density @15°Ckg/m3 | 848 | DIN 51757 |
| Flash point (COC)°C | 230 | ISO 2592 |
| Pour point°C | -36 | ISO 3016 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS
- SDS
- SDS