Eni i-Sint tech 0W-30
Top synthetic oil for Volkswagen group vehicles on Long Life Service
SAE 0W-30
Divinol Syntholight 0W-30 (Art-Nr. 49480) is a fully synthetic engine oil based on the latest technology. It meets the requirements set for extended oil-change intervals and provides optimal lubrication properties across the entire service interval, making it a precisely matched oil for modern passenger cars. The oil can be used in petrol and diesel engines, including vehicles with turbocharger and catalytic converter. Its key benefits are optimum engine cleanliness, excellent anti-wear protection, a lubricant film that does not tear under load and minimal evaporation losses, with the 0W-30 grade ensuring rapid oil flow at cold start. Divinol Syntholight 0W-30 meets API SN/CF and fulfils the performance requirements of MB-Approval 229.5/229.3, BMW Longlife-01, VW 505.00/502.00, GM-LL-B-025 and Renault RN 0700/0710.
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source
BMW's approval for extended-drain engine oils in petrol and diesel engines without a particulate filter. A full-SAPS level built on ACEA A3/B4.
VW 505 00 / 502 00 — petrol and diesel engine oil
VW's two standards quoted together: 502 00 for petrol engines, 505 00 for diesels without a particulate filter.
GM LL-B-025 — longlife diesel engine oil
The Opel/GM Europe specification for extended-drain oils in passenger-car diesel engines. In practice superseded by dexos2.
Renault RN0700 and RN0710
Renault's two engine oil approvals quoted together: RN0700 for petrol and non-DPF diesel, RN0710 for diesel engines including those with a particulate filter.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 0W30 | |
| Colour | L 4,0 | DIN ISO 2049 |
| Viscosity/40°C | 55 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 10 mm²/s | ASTM D 7042 |
| Viscosity index | 175 | ASTM D 2270 |
| Density/15°C | 0,845 g/cm³ | DIN EN ISO 12185 |
| Pour point | -40°C | DIN ISO 3016 |
| Flash point (Cleveland) | <-35°C | DIN ISO 2592 |
We email you the sheets listed below in a single archive. No account, no order required.