AGIP Novecento Racing 10W-40
Synthetic technology oil for classic cars in competition
SAE 10W-40
Divinol Dieselsuperlight 10W-40 (Art-Nr. 49590) is a low-friction engine oil built on modern formulation technology and designed specifically for passenger-car diesel engines. It carries high alkaline reserves, which give it very good corrosion protection properties across the service life of the fill. The oil reduces engine wear, particularly during the critical start-up and warm-up phase, when lubrication is most demanding. It also counteracts oil thickening over the service interval, which in turn helps the oil retain its intended flow and lubrication characteristics for longer. Divinol Dieselsuperlight 10W-40 meets API CF and ACEA B3 and carries the manufacturer performance levels VW 505.00 and MB-Freigabe 229.1; Divinol additionally recommends it where ACEA B4-08 is required. Typical values are an SAE 10W-40 grade, 88 mm²/s at 40 °C, 13 mm²/s at 100 °C, a viscosity index of 150, density 0.868 g/cm³ at 15 °C, sulphated ash 1.2 %, TBN 9 mgKOH/g, pour point -35 °C and flash point 220 °C.
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source
ACEA B3 oil sequence
ACEA's sequence for light-duty diesel engines. An earlier sequence, no longer on ACEA's current list; it remains the level specified for the engines of its era.Source
VW 505 00 — diesel engine oil
VW's standard for passenger-car diesel engine oils without unit-injector injection, on a fixed drain interval.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 10W-40 | |
| Sulphated ash | 1,2 % | DIN 51575 |
| Colour | 3.5 | DIN ISO 2049 |
| Viscosity/40°C | 88 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 13 mm²/s | ASTM D 7042 |
| Viscosity index | 150 | ASTM D 2270 |
| Density/15°C | 0,868 g/cm³ | DIN EN ISO 12185 |
| Pour point | -35 °C | DIN ISO 3016 |
| Flash point (Cleveland) | 220 °C | DIN EN ISO 2592 |
| TBN | 9 mgKOH/g |
We email you the sheets listed below in a single archive. No account, no order required.