Specifications
- Brand
- Petronas
- Category
- Engine oils
- Manufacturer code
- 74513
- Availability
- On order
Manufacturer's description
AKCELA UNITEK 10W-40 is a synthetic-based engine oil formulated for the new generation of low-emission diesel engines fitted to tractors, other agricultural machines and earth-moving equipment. Its SAE 10W-40 grade combines a synthetic base with a viscosity index of 156 and a pour point of -33 °C, providing dependable cold-start lubrication and stable viscosity at working temperature. A TBN of 10 mg KOH/g gives the alkaline reserve needed to neutralise combustion acids over the service interval. AKCELA UNITEK 10W-40 meets the CNH MAT 3521 specification together with API CJ-4, ACEA E7/E9, MB-Approval 228.31, Cummins CES 20081 and Caterpillar ECF-3/ECF-2/ECF-1. Available from Dubhe Romania SRL in 5 L packs.
Standards & approvals
SAE 10W-40
SAE 10W-40 viscosity grade
A viscosity grade, not a performance level.
MAT 3521
CNH MAT 3521 — agricultural equipment fluid
A CNH (Case New Holland) works standard for the fluids in its own tractors and machines, used to qualify oils through the dealer network.
API CJ-4
Diesel engine oil, API CJ-4 performance level
API's service category for compression-ignition engines. Current category.Source
ACEA E7 / E9
ACEA E7 and E9 — heavy-duty diesel, with and without DPF
Two ACEA sequences quoted together: E7 for heavy-duty diesel engines without a particulate filter, E9 for engines with a DPF, where sulphated ash must be capped. An oil meeting both covers a mixed fleet.
MB 228.31
Mercedes-Benz approval 228.31
A Mercedes-Benz operating-fluid approval (BeVo sheet).
Cummins CES 20081
The Cummins specification matching the API CK-4 level, for modern heavy-duty diesel engines with exhaust aftertreatment.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | CLEAR | |
| Density 15°Cg/cm³ | 0.868 | ASTM D 4052 |
| Viscosity @ 100°CcSt | 16.0 | ASTM D 445 |
| Viscosity index | 156 | ASTM D 2270 |
| Flash point Cl. O. C.°C | >210 | ASTM D 92 |
| T.B.N.mg KOH/g | 10.0 | ASTM D 2896 |
| Pour point°C | -33 | ASTM D 97 |
Packaging
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS
- TDS