On order
Eni Betula ESX 100
Ester-based synthetic oil for refrigeration compressors on HFC refrigerants
ISO VG 100
Specifications
- Brand
- Eni
- Category
- Compressor oils
- Type
- Refrigeration compressor oils
- Viscosity
- ISO VG 100
- Manufacturer code
- 007057
- Availability
- On order
Manufacturer's description
Eni Betula S 100 is a synthetic lubricant for refrigerating compressors, particularly recommended for hermetic type compressors (domestic fridges), open-type or partially sealed industrial units and heat pump systems that operate with standard refrigerating fluids (R-12, R-22, ammonia).
Applications
- Eni Betula S 100 is a synthetic lubricant for refrigerating compressors, particularly recommended for hermetic type compressors (domestic fridges), open-type or partially sealed industrial units and heat pump systems that operate with standard refrigerating fluids (R-12, R-22, ammonia).
Performance & benefits
- Very long draining intervals
- Compressor efficiency ensured by low tendency of lubricant to create carbon deposits
- Prevention of particles solidification inside the espansor circuit thanks to extremely low flocculation and pour points
- Optimal lubrication ensured even in case of broad temperature variations
Standards & approvals
DIN 51503 KC
Refrigeration compressor oil KC — DIN 51503
Class KC of DIN 51503: an oil for refrigeration compressors running halogenated refrigerants, with which it is miscible.
DIN 51503 KAA
Refrigeration compressor oil KAA — DIN 51503
Class KAA of the German standard for refrigeration compressor oils: a mineral oil for ammonia plants, not miscible with the refrigerant.
ISO 6743/3 DRA
Lubricant classification DRA — ISO 6743
Class DRA: mineral oils for refrigeration compressors running ammonia or non-miscible refrigerants.
ISO 6743/3 DRC
Lubricant classification DRC — ISO 6743
Class DRC of ISO 6743-3, for refrigeration compressors with low-temperature demands beyond a plain mineral oil.
ISO 6743/3 DRE
Lubricant classification DRE — ISO 6743
Class DRE of ISO 6743-3, for refrigeration compressors running halogenated refrigerants, where the oil must return from the evaporator.
Also listed
Approved for
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 851 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 100 | ASTM D 445 |
| Viscosity index | 104 | ASTM D 2270 |
| Flash point (COC)°C | 230 | ASTM D 92 |
| Pour point°C | -45 | ASTM D 97 |
| Foaming (sequence I) | cc/cc | ASTM D 892 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- TDS