Specifications
- Brand
- Mobil (ExxonMobil)
- Category
- Biodegradable lubricants (ECL)
- Viscosity
- NLGI 2
- Manufacturer code
- 20154030A610
- Availability
- On order
Manufacturer's description
Mobil SHC Aware Grease Series are high performance synthetic greases from ExxonMobil designed specifically for environmentally sensitive applications, meeting the U.S. EPA 2013 Vessel General Permit (VGP) and EU Ecolabel requirements. They are readily biodegradable and virtually non-toxic, formulated from biodegradable saturated ester base oils with a lithium/calcium soap thickener, and do not emulsify, giving excellent water wash and salt water corrosion resistance. The series, available in NLGI 0 (EP 0) and NLGI 2 (EP 2) grades, is intended for rudder stocks, ATB notch interfaces, cranes, deck winches, general grease points, wire rope and open gears, over a recommended working temperature range of -25°C to +125°C. Benefits include ready biodegradability and non-toxicity that reduce the impact and cost of potential environmental contamination, excellent adhesion and water resistance that resist washout and reduce re-greasing frequency, and excellent rust and corrosion protection, including good bearing protection in wet conditions.
Applications
- • Rudder stocks • ATB notch interfaces • Cranes • Deck winches • General grease points • Wire rope • Open gears
Performance & benefits
- • Meet US EPA 2013 VGP and EU Ecolabel requirements for environmentally acceptable lubricants • Ready Biodegradability and Non-Toxicity reduce impact and costs of potential environment contamination • Excellent adhesion and water resistance. Resist water washout, avoiding need for frequent re-greasing • Excellent rust and corrosion protection, excellent bearing protection in wet conditions • Recommended working temperature is from -25°C to +125°C
Fits
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Base oil viscosity of Greases @ 40 Cmm2/s | 320 | AMS 1697 |
| Copper strip corrosion, 24 h, 100 CRating | 1B | ASTM D4048 |
| Dropping point°C | 150 | ASTM D2265 |
| Four-Ball Extreme pressure Test, Weld pointkgf | 400 | ASTM D2596 |
| Penetration, worked, 60X, 0.1 mm | 270 | ASTM D217 |
| SKF Emcor Rust test, Distilled Water | 0,0 | ASTM D6138 |
| Water Washout, Loss @ 79 Cwt% | 3 | ASTM D1264 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- SDS
- TDS