Specifications
- Brand
- Eni
- Category
- Biodegradable lubricants (ECL)
- Type
- Drilling fluids
- Manufacturer code
- 007073
- Availability
- On order
Manufacturer's description
Eni Lamix 30 is a highly refined fluid especially developed for drilling oil based mud (OBM). It is a complex mixture of hydrocracked and desulfurized hydro-carbons with a narrow distillation cut. Eni Lamix 30 gives high drilling performance, even in extreme condition (HP/HT, low temperature, extended reach and horizontal wells). It is a non hazardous product for the aquatic environment, meets requirement of OSPAR Commission and it is classified by Norway Legislation as a 'Full Yellow' product. Eni Lamix 30 is classified as 'Almost non toxic' according to Australian Petroleum Exploration Association having a very low ecotoxicity testing to Tilapia Mossambica, Murgil Persia, Boleopthalmus Bottari (Report from Indian National Environmental Engineering Research Institute- NEERI)
Applications
- Eni Lamix 30 is a highly refined fluid especially developed for drilling oil based mud (OBM). It is a complex mixture of hydrocracked and desulfurized hydro-carbons with a narrow distillation cut. Eni Lamix 30 gives high drilling performance, even in extreme condition (HP/HT, low temperature, extended reach and horizontal wells). It is a non hazardous product for the aquatic environment, meets requirement of OSPAR Commission and it is classified by Norway Legislation as a 'Full Yellow' product. Eni Lamix 30 is classified as 'Almost non toxic' according to Australian Petroleum Exploration Association having a very low ecotoxicity testing to Tilapia Mossambica, Murgil Persia, Boleopthalmus Bottari (Report from Indian National Environmental Engineering Research Institute- NEERI)
Performance & benefits
- Very good rheological properties at low temperature
- Respect for the aquatic environment: high marine biodegradability and a very low ecotoxicity
- Very low sulphur and aromatic content
- High flash point, minimum fire hazard
- Good rubber compatibility
Standards & approvals
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | limpid | |
| Saybolt Colour | +30 | ASTM D 156 |
| Density at 15°Ckg/m³ | 790 | ASTM D 4052 |
| Viscosity at 20°Cmm²/s | 2.4 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 1.6 | ASTM D 445 |
| Flash point°C | 86 | ASTM D 93 |
| Pour point°C | - 42 | ASTM D 97 |
| Sulphurppm | <3 | ASTM D 5453 |
| Aromatics% (m/m) | <0.050 | NF M07-073 |
| Initial Boiling point°C | 205 | ASTM D 1160 |
| Final Boiling point°C | 245 | ASTM D 1160 |
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.
- SDS
- TDS