Shell Morlina S1 B oils are high performance oils designed to provide excellent protection for most industrial bearing and circulating oil system applications, particularly those processes where water shedding (demulsification) is important for the life of the equipment. Meets the most basic requirements of the Morgan standard for common bearing oils.
Applications
Oil lubricated bearingsSuitable for most plain and rolling element bearings in general industrial applications.
Enclosed industrial gear systemsLow or moderately loaded enclosed gears where EP performance is not required.
Performance & benefits
Good oil life – Maintenance savingShell Morlina S1 B oils use carefully chosen components to help provide consistent performance and protection throughout the maintenance interval.
Reliable wear & corrosion protectionShell Morlina S1 B oils help prolong the life of bearings and circulating systems through: - Good water separation characteristics that help ensure that critical oil films are retained between highly loaded parts. - Good air release characteristics to minimize cavitation and associated damage to circulating pumps. - Helps protect against corrosion, even in the presence of water.
Maintaining system efficiencyShell Morlina S1 B oils are blended with high quality, solvent refined base oils that promote good water separation and air release to ensure the efficient lubrication of the machines and systems.
Morgan MORGOIL® Lubricant Specification (New Oil Rev. 1.1) (MORGOIL is a registered trademark of the Morgan Construction Company)
Shell Morlina S1 B Oils meet or exceed the requirements of the following standards: DIN 51517-1 – Oil Type C
Paint Compatibility Shell Morlina S1 B oils are compatible with seal materials and paints normally specified for use with mineral oils
Standards & approvals
Paint Compatibility
Machine circulation systems
Roll-neck bearings
Typical characteristics
Property
Typical value
Method
Kinematic viscosity @40°Cmm2/s
320
ASTM D445
Kinematic viscosity @100°Cmm2/s
24.6
ASTM D445
Density @15°Ckg/m3
891
ISO 12185
Viscosity index
95
ISO 2909
Flash point (COC)°C
255
ISO 2592
Pour point°C
-6
ISO 3016
Rust, distilled water
Pass
ASTM D665A
Emulsion Test, minutes @82°C
30
ASTM D1401
Complete documentation
We email you the sheets listed below in a single archive. No account, no order required.