Mobil ATF 220
Mineral automatic transmission fluid for Dexron IID units, power steering and hydraulics
MAN 339 Typ V1
Mobil ATF 320 is an extra-high-performance automatic transmission fluid recommended for most passenger car and commercial automatic transmissions. It is also suitable for power steering systems, hydraulic applications, and some manual transmissions where an automatic transmission fluid is specified. The fluid delivers the correct frictional characteristics for smooth transmission operation across wide operating bands, protection against degradation at high operating temperatures and during extended service, low-temperature pumpability and circulation for reliable cold-start performance, and compatibility with all conventional seal materials found in transmission units. Mobil ATF 320 holds approvals from MAN (339 Typ Z1/V1/L1), Voith Turbo (H55.6335.xx), ZF (TE-ML 03D/04D/14A/17C) and Volvo 97341, and is recommended for applications requiring Allison C-4, Ford MERCON and GM DEXRON IIIG performance, meeting or exceeding the R. Bosch AS TE-ML 09 requirement.
MAN 339 type V1 — automatic transmission fluid
MAN's list of fluids for bus and truck automatic transmissions; type V1 is the most widely quoted level.
ZF TE-ML 14A lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 04D lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
ZF TE-ML 17C lubricant list
ZF's approved-lubricant list for a family of its transmissions and axles.Source
Volvo 97341 — hydraulic oil
The Volvo number for a hydraulic oil in its own parts and fluids catalogue.
Allison C-4 — off-highway automatic transmission fluid
Allison's most widely quoted fluid specification for off-highway and truck automatic transmissions: stable wet-clutch friction, gear protection and seal compatibility.
Ford MERCON — automatic transmission fluid
Ford's automatic transmission fluid specification, defined by wet-clutch friction characteristics and oxidation stability.
GM DEXRON III-G — automatic transmission fluid (obsolete)
The DEXRON III-G level, with better oxidation stability than II-D. Licensing has ended and GM has moved on to DEXRON VI.
| Property | Typical value | Method |
|---|---|---|
| Brookfield Viscosity @ -40 CmPa.s | 17900 | ASTM D2983 |
| Density @ 15 Cg/ml | 0.856 | ASTM D4052 |
| Flash point, Cleveland Open Cup°C | 220 | ASTM D92 |
| Kinematic viscosity @ 100 Cmm2/s | 7.6 | ASTM D445 |
We email you the sheets listed below in a single archive. No account, no order required.