Eni MX 4006

Specifications

Brand

Eni

Category

Antifreeze & additives

Type

Viscosity modifiers

Manufacturer code

005153

Availability

On order

Manufacturer's description

Eni MX 4006, directly via dissolution in suitable base stocks, is recommended to prepare multigrade crankcase engine oils meeting international requirements for automotive, marine and industrial lubricants. To obtain a VII additive, Eni MX 4006 should be dissolved at approximately 9% wt in low viscosity base oil, preferably SN 130. The VII additive is then diluted at 10% wt in SN 150 to yield a SSI of about 25 and a Thickening Power between 10.3-10.9 mm2/s.

Applications

• Eni MX 4006, directly via dissolution in suitable base stocks, is recommended to prepare multigrade crankcase engine oils meeting international requirements automotive, marine and industrial lubricants.
• To obtain a VII additive, Eni MX 4006 should be dissolved at approximately 9% wt in low viscosity base oil, preferably SN 130. The VII additive is then diluted at 10% wt in SN 150 to yield a SSI of about 25 and a Thickening Power between 10.3-10.9 mm2/s. SUGGESTED TREAT RATES
• Recommended treat levels calculated on mineral formulations with additive package are the following: SAE GRADE Treat level % mass 10W-30 0.45 - 0.80 10W-40 0.95 - 1.30 15W-40 0.65 - 0.95 15W-50 1.05 - 1.40 20W-40 0.10 - 0.30 20W-50 0.45 - 0.80

Approved for

• SAE

Typical characteristics

Complete documentation

We email you the sheets listed below in a single archive. No account, no order required.

• SDSEN
• TDSENSeptember 2017